Mechanical Properties of V-O-N Coatings Synthesized by Cathodic Arc Evaporation
Authors:
- Bogdan WarcholinskiBWBogdan Warcholinski
- Adam GilewiczAGAdam Gilewicz
- Alexandr S. KuprinAKAlexandr S. Kuprin
- Galina N. TolmachovaGTGalina N. Tolmachova
- Elena N. ReshetnyakERElena N. Reshetnyak
- Ilya O. KlimenkoIKIlya O. Klimenko
- Igor V. KolodiyIKIgor V. Kolodiy
- Ruslan L. VasilenkoRVRuslan L. Vasilenko
- Maria TarnowskaMTMaria Tarnowska
Open Access
Abstract
The V-O-N coating set was produced at different relative oxygen concentrations of O2(x) = O2/(N2 +O2) using cathodic arc evaporation. The aim of the research was to determine the effect of oxygen on coating properties. The coatings’ composition and structural properties (X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX)) and mechanical properties—hardness, adhesion, and wear resistance (nano-indenter, scratch tester, ball-on-disc tester)—were extensively investigated. EDX and XRD analyses indicate that in coatings formed with a relative oxygen concentration in the range of 20–30%, the oxygen concentration in the coating increases dramatically from approximately 16 at.%. to 63 at.%, and the nitrogen concentration drops from about 34 at.% up to 3 at.%. This may indicate greater activity of oxygen compared to nitrogen in forming compounds with vanadium. The occurrence of the V5O9 phase belonging to the Magnéli phases was observed. Microscopic observations indicate that the number of surface defects increases with the oxygen concentration in the coating. The opposite effect is characterized by mechanical properties—hardness, adhesion, and wear resistance decrease with increasing oxygen concentration in the coating.Keywords
Funding Information
- National Academy of Sciences of Ukraine (KPKVK 6541230)
This publication has 52 references indexed in Scilit:
- Titanium and vanadium oxynitride powders as pseudo-capacitive materials for electrochemical capacitorsElectrochimica Acta, 2012
- Thin Film Deposition Using Energetic IonsMaterials, 2010
- Structural and electrical properties of magnetron sputtered Ti(ON) thin films: The case of TiN doped in situ with oxygenJournal of Power Sources, 2009
- Stress and preferred orientation in nitride-based PVD coatingsSurface and Coatings Technology, 2008
- Comparative studies on microstructure and mechanical properties of CrN, Cr–C–N and Cr–Mo–N coatingsJournal of Materials Processing Technology, 2007
- Structural, optical, and electrical properties of WOx(Ny) films deposited by reactive dual magnetron sputteringSurface and Coatings Technology, 2006
- A crystal chemical approach to the formulation of self-lubricating nanocomposite coatingsSurface and Coatings Technology, 2005
- The effect of intrinsic parameters on the critical load as measured with the scratch test methodSurface and Coatings Technology, 2001
- Droplet formation on steel substrates during cathodic steered arc metal ion etchingVacuum, 1997
- Formation of metal oxides by cathodic arc depositionSurface and Coatings Technology, 1995