Achieving Low-Energy Driven Viologens-Based Electrochromic Devices Utilizing Polymeric Ionic Liquids
- 27 October 2016
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (44) , 30351-30361
Abstract
Herein, three kinds of viologens-based electrochromic devices (ECDs) (heptyl viologen (HV(BF4)2), octyl viologen (OV(BF4)2), and nonyl viologen (NV(BF4)2)) were fabricated utilizing ferrocene (Fc) as a redox mediator. Among them, the NV(BF4)2-based ECD exhibits the highest coloration efficiency (36.2 cm2/C) owing to the lowest driving energy. Besides, switching between 0 and 1.2 V, the NV(BF4)2-based ECD shows a desirable initial transmittance change (ΔT = 56.7% at 605 nm), and long-term stability (ΔT = 45.4% after 4000 cycles). Furthermore, a UV-cured polymer electrolyte containing polymeric ionic liquid (PIL, 1-allyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) and ethoxylated trimethylolpropane triacrylate (ETPTA) was introduced to the NV(BF4)2-based ECD. By controlling the weight percentage of the PIL, different curing degrees of the polymer electrolytes were obtained and led to an improved stability of the NV(BF4)2-based ECD because of the immobilization of NV(BF4)2. This observation was explained by calculating the apparent diffusivity (Dapp) of the redox species in the NV(BF4)2-based ECD under various curing degrees. In addition, increasing the amount of PIL leads to a lower driven energy needed for the NV(BF4)2-based ECD, following the same trend as the value of Dapp. Among all NV(BF4)2-based ECDs, 20 wt % of PIL addition (20-PIL ECD) exhibits large transmittance change (ΔT = 55.2% at 605 nm), short switching times (2.13 s in coloring and 2.10 s in bleaching), high coloration efficiency (60.4 and 273.5 cm2/C at 605 nm, after excluding the current density at the steady state), and exceptional cycling stability (ΔT = 53.8% after 10,000 cycles, or retained 97.5% of its initial ΔT).Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (104-2221-E-002-127-MY2, 105-ET-E-002-003-ET)
This publication has 62 references indexed in Scilit:
- A novel 1,1′-bis[4-(5,6-dimethyl-1H-benzimidazole-1-yl)butyl]-4,4′-bipyridinium dibromide (viologen) for a high contrast electrochromic deviceOrganic Electronics, 2013
- Intramolecular redox-induced dimerization in a viologen dendrimerJournal of Materials Chemistry C, 2013
- An Electrochromic Ionic Liquid: Design, Characterization, and Performance in a Solid-State PlatformACS Applied Materials & Interfaces, 2012
- The effect of ionic liquid fragment on the performance of polymer electrolytesPolymer International, 2011
- Water-Processable Polyaniline with Covalently Bonded Single-Walled Carbon Nanotubes: Enhanced Electrochromic Properties and Impedance AnalysisACS Applied Materials & Interfaces, 2011
- The donor–acceptor approach allows a black-to-transmissive switching polymeric electrochromeNature Materials, 2008
- Metallo‐Supramolecular Polymers Based on Functionalized Bis‐terpyridines as Novel Electrochromic MaterialsAdvanced Materials, 2007
- Photochromism and thermochromism of Schiff bases in the solid state: structural aspectsChemical Society Reviews, 2004
- Organic Polymeric Electrochromic Devices: Polychromism with Very High Coloration EfficiencyChemistry of Materials, 2004
- Recrystallisation process in viologen-based electrochromic deposits: voltammetry coupled with rapid time-resolved spectroscopyElectrochimica Acta, 1983