NiTi Production via the FFC Cambridge Process: Refinement of Process Parameters
- 1 January 2010
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (3) , E36-E43
Abstract
The electrochemical FFC Cambridge process is well suited for NiTi production as it avoids the Ni segregation associated with conventional manufacturing routes. A homogeneous low oxygen product can be produced through the direct electro-deoxidation of the mixed metal oxides in a molten salt bath. This work builds on previous literature concerning the reduction of NiTi [ J. Electrochem. Soc. , 155 , E171 (2008) ; Chin. Sci. Bull. , 51 , 2535 (2006) ] through the investigation of the effects of reduction temperature and the materials of construction on the phases formed. Previous work has shown that the use of a Ti cathodic current collector gave Ti enrichment, forming monoclinic monoclinic NiTi at ambient temperature [ J. Electrochem. Soc. , 155 , E171 (2008) ]. The use of a Ni current collector caused Ni enrichment in the product, stabilizing the high temperature B2 cubic form at ambient temperature. This was true for all reductions carried out from 1173 to 1273 K, but for 1123 K and below, monoclinic NiTi was formed. A NiTi current collector yielded Ni enrichment producing B2 cubic NiTi at ambient temperature. Mechanisms for the formation of these phases were proposed. The work also detailed the importance of good cell design and how sealing quality can dramatically affect the homogeneity of the products.Keywords
This publication has 19 references indexed in Scilit:
- Production of Ti–W Alloys from Mixed Oxide Precursors via the FFC Cambridge ProcessJournal of the Electrochemical Society, 2009
- Production of NiTi via the FFC Cambridge ProcessJournal of the Electrochemical Society, 2008
- The Production of Ti–Mo Alloys from Mixed Oxide Precursors via the FFC Cambridge ProcessJournal of the Electrochemical Society, 2008
- Physical metallurgy of Ti–Ni-based shape memory alloysProgress in Materials Science, 2005
- Electrochemistry at Conductor/Insulator/Electrolyte Three-Phase Interlines: A Thin Layer ModelThe Journal of Physical Chemistry B, 2005
- Voltammetry of Titanium Dioxide in Molten Calcium Chloride at 900°CJournal of the Electrochemical Society, 2005
- Electrochemical Preparation of Silicon and Its Alloys from Solid Oxides in Molten Calcium ChlorideAngewandte Chemie International Edition, 2004
- Electrochemical Fabrication of Nickel Manganese Gallium Alloy PowderAdvanced Engineering Materials, 2003
- Science and Technology of Shape-Memory Alloys: New DevelopmentsMRS Bulletin, 2002
- An overview of nitinol medical applicationsMaterials Science and Engineering: A, 1999