Thermal, mechanical, and viscoelastic properties of recycled poly(ethylene terephthalate) fiber‐reinforced unsaturated polyester composites
Authors:
- 16 June 2016
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 39 (5) , 1682-1693
Abstract
Recycled polyethylene terephthalate (PET) fiber has been used as reinforcing filler for unsaturated polyester resin (UPR) in order to obtain UPR/PET fiber composites. Different loadings of PET fibers (5–18 phr—parts per hundred parts of resin) of different average lengths (2–3 to 20 mm) were added to the UPR. The mechanical properties of the UPR/PET fiber composites increased up to 8 phr PET fiber loading with a length lower than 5 mm, because of the high affinity between the UPR and the PET fiber surface and the good dispersion of the fiber into the matrix. However, higher PET fiber loading caused a decrease in the mechanical properties of the composites because of the agglomeration of the fibers. The UPR/PET fiber composites presented higher storage moduli than the UPR, and an increase of the glass transition temperature in the composites reinforced with 5–8 phr of short PET fiber was found; further, higher degree of crosslinking was reached. The addition of 5–8 phr PET fiber of short length improved the thermal stability of the composites and the post‐curing was produced at higher temperature with much reduced enthalpy. POLYM. COMPOS., 39:1682–1693, 2018. © 2016 Society of Plastics EngineersKeywords
This publication has 38 references indexed in Scilit:
- Improving the mechanical properties of glass-fibre-reinforced polyester composites by modification of fibre surfaceMaterials & Design (1980-2015), 2010
- Prediction of glass transition temperatures: Binary blends and copolymersMaterials Letters, 2008
- Effect of nanoclay on shrinkage control of low profile unsaturated polyester (UP) resin cured at room temperaturePolymer, 2004
- The influence of fibre treatment on the performance of coir-polyester compositesComposites Science and Technology, 2001
- Tailoring of interfaces in glass fiber reinforced polymer composites: a reviewMaterials Science and Engineering: A, 2001
- Surface characterization of natural fibers; surface properties and the water up-take behavior of modified sisal and coir fibersGreen Chemistry, 2001
- Sisal fibre and its composites: a review of recent developmentsComposites Science and Technology, 2000
- Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materialsMaterials Science and Engineering: R: Reports, 2000
- Time-temperature transformation (TTT) cure diagram of an unsaturated polyester resinJournal of Polymer Science Part B: Polymer Physics, 1997
- Fibre-matrix adhesion and its relationship to composite mechanical propertiesJournal of Materials Science, 1993