Squeeze Behaviors of Magnetorheological Fluids under Different Compressive Speeds
Open Access
Abstract
The compression tests under the unidirection for magnetorheological (MR) fluids have been studied at different compressive speeds. The results indicated that curves of compressive stress under different compression speeds at the applied magnetic field of 0.15 T overlapped well and were shown to be an exponent of about 1 of the initial gap distance in the elastic deformation region and accorded well with the description of continuous media theory. The difference in compressive stress curves increases significantly with an increasing magnetic field. At this time, the continuous media theory description could not be accounted for the effect of compressive speed on the compression of MR fluid, which seems to deviate from the Deborah number prediction under the lower compressive speeds. An explanation based on the two-phase flow due to aggregations of particle chains resulting in much longer relaxation times at a lower compressive speed was proposed to explain this deviation. The results have guiding significance for the theoretical design and process parameter optimization for the squeeze-assisted MR devices such as MR dampers and MR clutches based on the compressive resistance.Keywords
Funding Information
- National Natural Science Foundation of China (51205367, 2014C31090, LY15E050009)
- Science Technology Project of Zhejiang Province (51205367, 2014C31090, LY15E050009)
- Natural Science Foundation of Zhejiang Province (51205367, 2014C31090, LY15E050009)
This publication has 41 references indexed in Scilit:
- Oscillatory normal forces of magnetorheological fluidsSoft Matter, 2012
- An experimental study on the normal stress of magnetorheological fluidsSmart Materials and Structures, 2011
- Ultrahigh yield stress in a general electrorheological fluid under compressionSmart Materials and Structures, 2010
- An investigation of the behaviour of magnetorheological fluids in compression modeJournal of Materials Processing Technology, 2008
- Primary and secondary normal stress differences of a magnetorheological fluid (MRF) up to magnetic flux densities of 1 TJournal of Non-Newtonian Fluid Mechanics, 2008
- Analysis of the magnetomechanical behavior of MRFs based on micromechanics incorporating a statistical approachSmart Materials and Structures, 2007
- The performance of magnetorheological fluid in squeeze modeSmart Materials and Structures, 2007
- A critical study of the Bingham model in squeeze-flow modeMaterials & Design (1980-2015), 2001
- Super-strong magnetorheological fluidsJournal of Physics: Condensed Matter, 2001
- Use of the parallel-plate plastometer for the characterisation of viscous fluids with a yield stressJournal of Non-Newtonian Fluid Mechanics, 1981