Chemical and Phase Composition of the Friction Surfaces Fe–Mn–C–B–Si–Ni–Cr Hardfacing Coatings
- 9 October 2017
- journal article
- research article
- Published by ASME International in Journal of Tribology
- Vol. 140 (2)
Abstract
The paper presents the results of an X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) study of chemical and phase composition of the friction surfaces Fe–Mn–C–B–Si–Ni–Cr hardfacing coatings. The alloy was used as a core mixture to produce flux-cored wire of 2.4 mm in diameter. The coating was deposited by gas metal arc welding using CO2 as a shielding gas. The tribological examination was conducted in a ball on disk system with a load of 20 N under dry friction conditions. A XPS were used to examine the structures on the friction surface and depend on depth 5, 10, 15, 20, 50, 100, 200, and 6000 nm. The segregation of C, B, and Si atoms was observed in the process of the friction. The presence of compounds such as oxides (B2O3, SiO2, Cr2O3), carbides (Fe3C, Cr7C3), and borides (FeB, Fe2B) was detected on the surface and in the subsurface layer of the Fe–Mn–C–B–Si–Ni–Cr coating. The formation of these structures increases the wear resistance of composite coatings.Keywords
This publication has 13 references indexed in Scilit:
- Study of abrasive wear resistance of Fe-based nanostructured hardfacingWear, 2016
- Microstructure and properties of Fe-Cr-C hardfacing alloys reinforced with TiC-NbCJournal of Iron and Steel Research International, 2016
- The effect of microstructure on abrasive wear of a Fe–Cr–C–Nb hardfacing alloy deposited by the open arc welding processSurface and Coatings Technology, 2015
- Study of the Structure and Properties of Wear-Resistant Eutectic Fe–Mn–C–B–Si–Ni–Cr CoatingsPowder Metallurgy and Metal Ceramics, 2013
- Microstructure and wear characteristics of high-carbon Cr-based alloy claddings formed by gas tungsten arc welding (GTAW)Surface and Coatings Technology, 2010
- Wear behaviour of hardfaced Fe-Cr-C alloy and austenitic steel under 2-body and 3-body conditions at elevated temperatureTribology International, 2010
- Segregation of atoms of the eutectic alloys Fe–Mn–C–B–Si–Ni–Cr at friction wearWear, 2009
- Tribofilm formation and mild wear by tribo-sintering of nanometer-sized oxide particles on rubbing steel surfacesWear, 2007
- Microstructure of Fe-Based Alloy Hardfacing Coating Reinforced by TiC-VC ParticlesJournal of Iron and Steel Research International, 2006
- Weld procedural effect on the performance of iron based hardfacing deposits on cast iron substrateJournal of Materials Processing Technology, 2006