Analysis of the Influence of Fibers on the Formability of Metal Blanks in Manufacturing Processes for Fiber Metal Laminates
Open Access
- 5 January 2019
- journal article
- research article
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 3 (1) , 2
Abstract
In the one-step manufacturing process for fiber metal laminate parts, the so-called in situ hybridization process, the fabrics are interacting with metal blanks. During deep drawing, the liquid matrix is injected between the metal sheets through the woven fiber layers. The metal blanks can be in contact with dry or with infiltrated fibers. The formability of the blanks is influenced by the variation of the starting time of injection. The reason for that is that, due to high contact forces, the fibers are able to deform the metal surface locally, so that movement and the strain of the blanks is inhibited. To investigate the influence of different fibers on the formability of metals, Nakazima tests are performed. In these tests, two metal blanks are formed with an interlayer of fibers. The results are compared with the formability of two blanks without any interlayer. It is shown that in with fibers between sheets, the formability decreases compared to the formability of two metal blanks without interlayers. Based on a simplified numerical model for different types of fibers, the interactions of the fibers with the metal blank are analyzed. It could be shown that the friction due to contact has more influence than the friction due to the form fit caused by the imprints.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (BE 5196/4_1)
This publication has 5 references indexed in Scilit:
- Developments and Analyses of Alternative Processes for the Manufacturing of Fiber Metal Laminates2018
- Thermoplastic fibre metal laminates: Stiffness properties and forming behaviour by means of deep drawingArchives of Civil and Mechanical Engineering, 2018
- The effect process parameters on epoxy flow behavior and formability with CR340/CFRP composites by different laminating in deep drawing processJournal of Materials Processing Technology, 2016
- ARALL: A materials challenge for the next generation of aircraftMaterials & Design (1980-2015), 1986
- Development of a new hybrid material (ARALL) for aircraft structuresIndustrial & Engineering Chemistry Product Research and Development, 1983