Stability assessment and development of design criteria for SCBF systems with in‐plane buckling braces
- 29 December 2022
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 52 (4) , 1136-1160
Abstract
Special concentrically braced frames (SCBFs) with in‐plane buckling (IPB) braces are often designed using the provisions applicable for out‐of‐plane buckling (OOPB) brace systems. As a result, the IPB brace systems may fail in the undesirable modes as observed in past experimental studies. In this study, a novel simplified analytical formulation based on the rigid beam spring model (RBSM) has been proposed to prevent the out‐of‐plane buckling of IPB braces. A high‐fidelity finite element model (FEM) is generated and validated with the experimental studies incorporating the influence of the residual stress, imperfection, and strain hardening. The variability, sensitivity, and uncertainties involved in predicting the direction of buckling of braces are examined. A parametric study has been carried out to investigate the influence of thickness and clearance of the gusset and knife plates, geometric imperfections, slenderness ratios, compactness ratios, residual stresses, and frame actions considering the most destabilizing effect in the OOPB mode. The third mode of buckling, termed as the mixed‐mode of buckling, has been observed in this study. A design criterion is proposed to get the desired IPB mode of buckling of braces in SCBFs. Multivariate regression analysis is carried out to incorporate the impact of various parameters as well as uncertainties in the formulation of the design criteria. The validity of the proposed equation is verified by comparing the findings of past experimental studies for various loading scenarios. Finally, a resistance factor of 0.8 in the LRFD approach has been proposed for the IPB brace systems.Keywords
This publication has 35 references indexed in Scilit:
- Experimental Tests of Truss Bridge Gusset Plate Connections with Sway-Buckling ResponseJournal of Bridge Engineering, 2013
- Seismic Behavior of Steel Buildings with Hybrid Braced FramesJournal of Structural Engineering, 2013
- A model to simulate special concentrically braced frames beyond brace fractureEarthquake Engineering & Structural Dynamics, 2012
- A balanced design procedure for special concentrically braced frame connectionsJournal of Constructional Steel Research, 2011
- Modeling of Residual Stresses in Structural Stainless Steel SectionsJournal of Structural Engineering, 2009
- Experimental Investigation of Inelastic Cyclic Buckling and Fracture of Steel BracesJournal of Structural Engineering, 2009
- Improved Seismic Performance of Gusset Plate ConnectionsJournal of Structural Engineering, 2008
- Reliability Analysis of Block Shear Capacity of Coped Steel BeamsJournal of Structural Engineering, 2004
- Analytical investigation and the design of the compressive strength of steel gusset plate connectionsJournal of Constructional Steel Research, 2002
- Uncertainties in Material and Geometric Strength and Load VariablesNaval Engineers Journal, 2002