Analysis and design of a novel variable-inductor-based LED driver for DC lighting grids
- 3 November 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Abstract
This paper presents a novel variable inductor (VI) based LED driver for DC grid lighting applications. The proposed driver requires only a series inductor and a transformer as major components to drive the LED lamp from a half-bridge inverter. By introducing a VI as the series inductor, the LED current can be controlled independently from any other parameter, which makes it possible to drive and regulate several LED branches from the same half-bridge output. Other advantages of the proposed converter include inherent open circuit and short circuit protections, ZVS for the bridge transistor and ZCS for the output rectifier diodes, simple dynamics, possibility of analog and PWM dimming, constant switching frequency operation and high efficiency. The converter is thoroughly analyzed and modelled for both steady-state and dynamic operation. As another novelty of this paper, the dynamic response of the VI has been studied and taken into account to obtain the complete transfer function of the VI-controlled system. In addition, some housekeeping issues that usually arise when dealing with VI, e.g. how to drive the VI bias winding, are solved in this work. Experimental results provided from a 50 W laboratory prototype demonstrate the correctness of the performed analysis and the good possibilities of the proposed converter.Keywords
This publication has 21 references indexed in Scilit:
- A New Technique to Equalize Branch Currents in Multiarray LED Lamps Based on Variable InductorsIEEE Transactions on Industry Applications, 2015
- Integrated Asymmetrical Half-Bridge Zeta (AHBZ) Converter for DC/DC Stage of LED Driver With Wide Output Voltage Range and Low Output CurrentIEEE Transactions on Industrial Electronics, 2015
- Bipolar Ripple Cancellation Method to Achieve Single-Stage Electrolytic-Capacitor-Less High-Power LED DriverIEEE Journal of Emerging and Selected Topics in Power Electronics, 2015
- Optimization of a Front-End DCM Buck PFP for an HPF Integrated Single-Stage LED DriverIEEE Journal of Emerging and Selected Topics in Power Electronics, 2015
- Multichannel LED Driver With CLL Resonant ConverterIEEE Journal of Emerging and Selected Topics in Power Electronics, 2015
- A Single-Stage LED Driver Based on BCM Boost Circuit and $LLC$ Converter for Street Lighting SystemIEEE Transactions on Industrial Electronics, 2015
- A Novel Control Scheme of Quasi-Resonant Valley-Switching for High-Power-Factor AC-to-DC LED DriversIEEE Transactions on Industrial Electronics, 2015
- Dimming-Feedback Control Method for TRIAC Dimmable LED DriversIEEE Transactions on Industrial Electronics, 2014
- Capacitance Reduction With An Optimized Converter Connection Applied to LED DriversIEEE Transactions on Industrial Electronics, 2014
- Scalability of Quasi-Hysteretic FSM-Based Digitally Controlled Single-Inductor Dual-String Buck LED Driver to Multiple StringsIEEE Transactions on Power Electronics, 2013