Application of Vortex Control to an Automotive Transcritical R744 Ejector Cycle
Authors:
- 3 April 2018
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Expansion work recovery by two-phase ejector is known to be beneficial to vapor compression cycle performance. However, one of the biggest challenges with ejector vapor compression cycles is that the ejector cycle performance is sensitive to working condition changes which are common in automotive applications. Different working conditions require different ejector geometries to achieve maximum performance. Slightly different geometries may result in substantially different COPs under the same conditions. The ejector motive nozzle throat diameter (motive nozzle restrictiveness) is one of the key parameters that can significantly affect ejector cycle COP. This paper presents the experimental results of the application of a new two-phase nozzle restrictiveness control mechanism to an automotive transcritical R744 ejector cycle. This new control mechanism, vortex control, utilizes an adjustable vortex at the nozzle inlet to control the nozzle restrictiveness on the two-phase flow without changing the physical dimensions of the nozzle geometry. The test results show that nozzle restrictiveness can be adjusted with this new mechanism. Under common working conditions, with vortex control the ejector motive inlet pressure can be varied from 8609 kPa to 9637 kPa for constant motive inlet temperature and total motive mass flow rate.Keywords
This publication has 7 references indexed in Scilit:
- Experimental investigation of a novel expansion device control mechanism: Vortex control of initially subcooled flashing R134a flow expanded through convergent-divergent nozzlesInternational Journal of Refrigeration, 2018
- Influence of Nozzle Divergent Part Length and Throat Diameter on Vortex Control of Initially Subcooled Flashing FlowSAE International Journal of Passenger Cars - Mechanical Systems, 2017
- A New Control Mechanism for Two-Phase Ejector in Vapor Compression Cycles for Automotive Applications Using Adjustable Motive Nozzle Inlet SwirlSAE International Journal of Passenger Cars - Mechanical Systems, 2016
- A review on two-phase ejector as an expansion device in vapor compression refrigeration cycleRenewable and Sustainable Energy Reviews, 2012
- Experimental and numerical investigation of the influence of the two-phase ejector geometry on the performance of the R744 heat pumpInternational Journal of Refrigeration, 2012
- Historical and present developments of ejector refrigeration systems with emphasis on transcritical carbon dioxide air-conditioning applicationsInternational Journal of Refrigeration, 2011
- Experimental validation of a prototype ejector designed to reduce throttling losses encountered in transcritical R744 system operationInternational Journal of Refrigeration, 2008