Studying the Properties of RF-Sputtered Nanocrystalline Tin-Doped Indium Oxide
Authors:
Open Access
- 29 May 2011
- journal article
- research article
- Published by Hindawi Limited in International Journal of Photoenergy
- Vol. 2011, 1-6
Abstract
The ceramic target of Indium tinoxide (ITO) (90% In2O3-10%SnO2) has been used to prepare transparent semiconductive thin films on glass substrate by RF magnetron sputtering at room temperature. The properties of the thin films are affected by controlling the deposition parameters, namely, RF power values and deposition times. The structure, morphology, optical and electrical properties of the thin films are investigated using X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), atomic force microscope (AFM), UV-Vis spectrophotometer, and four-point probe measurement. Nanoparticles of 10–20 nm are measured and confirmed using both FESEM and AFM. The main preferred orientations of the prepared thin films are (222) and (400) of the cubic ITO structure. The transparent semiconductive films have high transmittance within the visible range of values 80–90% and resistivity of about Ω⋅cm.
Keywords
This publication has 32 references indexed in Scilit:
- Structural, optical and electrical characteristics of ITO thin films deposited by sputtering on different polyester substratesMaterials Chemistry and Physics, 2008
- Electrical and optical study of ITO films on glass and polymer substrates prepared by DC magnetron sputtering type negative metal ion beam depositionMaterials Chemistry and Physics, 2008
- Polycrystalline growth and recrystallization processes in sputtered ITO thin filmsThin Solid Films, 2006
- Preparation and characterization of nano particles ZnO films for dye-sensitized solar cellsMaterials Chemistry and Physics, 2005
- A statistical parameter study of indium tin oxide thin films deposited by radio-frequency sputteringThin Solid Films, 2005
- The effect of solvent on the etching of ITO electrodeMaterials Chemistry and Physics, 2004
- Structural, optical, and electrical properties of indium tin oxide films with corundum structure fabricated by a sol–gel route based on solvothermal reactionsThin Solid Films, 2002
- High quality ITO film formation by the simultaneous use of cluster ion beam and laser irradiationMaterials Chemistry and Physics, 2002
- Preparation and characterisation of tin-doped indium oxide filmsMaterials Chemistry and Physics, 2001
- A simple method for the determination of the optical constants n, k and the thickness of a weakly absorbing thin filmJournal of Physics E: Scientific Instruments, 1976