Corrosion resistance of Ti-Ta-Zr coatings in the Boiling Acid Solutions
Authors:
Open Access
- 8 November 2016
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 156 (1) , 012023
Abstract
In this study corrosion resistance of Ti-Ta-Zr coatings fabricated on VT14 titanium alloy workpieces using a high-energy electron beam injected in the atmosphere was investigated. Estimation of corrosion resistance of surface alloyed layers was carried out by the weight-change method. Boiling solution of 65 % nitric acid in water and 5 % of sulfuric acid in water were used as the corrosive environments. Investigation of samples after corrosion tests was carried out using a Carl Zeiss EVO 50 XVP scanning electron microscope.Keywords
This publication has 7 references indexed in Scilit:
- Structure and properties of titanium surface layers after electron beam alloying with powder mixtures containing carbonApplied Surface Science, 2015
- Influence of chemical composition of initial powders on structure and properties of ‘‘Ti–Ta–Zr’’ coatings fabricated on cp–titanium substrates by electron beam claddingIOP Conference Series: Materials Science and Engineering, 2014
- Structure and Corrosion Resistance of Ti-Ta-Nb Coatings Obtained by Electron Beam Cladding in the Air-AtmosphereApplied Mechanics and Materials, 2014
- Processing Ti-25Ta-5Zr Bioalloy via Anodic Oxidation Procedure at High VoltageMetallurgical and Materials Transactions B, 2011
- Influence of concentration and temperature on the corrosion behavior of titanium, titanium-20 and 40% tantalum alloys and tantalum in sulfuric acid solutionsMaterials Chemistry and Physics, 2007
- Titanium and Titanium Alloys2003
- Preparation and characterization of Ti–Ta alloys for application in corrosive mediaMaterials Letters, 2003