On the effect of adhesive thickness on mode I fracture energy - an experimental and modelling study using a trapezoidal cohesive zone model
- 3 April 2019
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 96 (5) , 490-514
Abstract
In this paper, a combined experimental-numerical method was proposed to study the effect of adhesive thickness on mode I fracture energy of the adhesive layer, using Double Cantilever Beam (DCB) testing and Cohesive Zone Modelling (CZM). A Trapezoidal Cohesive Zone Model (TCZM) was introduced in tabular form into commercial Finite Element (FE) package to simulate the crack propagation behaviour in the adhesive layer and include the ductile characteristics of the selected adhesive. In order to overcome the difficulty in the accurate monitoring and measurement of crack length during loading, the Compliance-Based Beam Method (CBBM) was adopted to deduce the mode I strain energy release rate data. The load–displacement curve, Resistance curve (R curve), and mode I fracture energy data obtained from both experiment and simulation were analysed to validate the established FE model. It was observed that adhesive thickness has a significant influence on the ductile fracture behaviour of adhesive under mode I loading. The mode I fracture energy increases initially, and then decreases with the increase of adhesive layer thickness in the selected thickness range, while obvious transition was also observed in the perspective of micro-scale failure mechanism of the fracture surface through Scanning Electron Microscopy (SEM).Keywords
Funding Information
- Foundation of Hubei Key Laboratory of Hydroelectric Machinery Design & Maintenance (2018KJX01)
- National Natural Science Foundation of China (51605072, 51605074)
This publication has 40 references indexed in Scilit:
- Characterization of aluminium one-component polyurethane adhesive joints as a function of bond thickness for the automotive industry: Fracture analysis and behaviorEngineering Fracture Mechanics, 2017
- Comparative evaluation of the Double-Cantilever Beam and Tapered Double-Cantilever Beam tests for estimation of the tensile fracture toughness of adhesive jointsInternational Journal of Adhesion and Adhesives, 2016
- Fatigue Crack Growth Behavior of Bonded Aluminum JointsProcedia Engineering, 2016
- The Effect of Adhesive Thickness on the Mechanical Behavior of a Structural Polyurethane AdhesiveThe Journal of Adhesion, 2014
- Composite bonded joints under mode I fatigue loadingInternational Journal of Adhesion and Adhesives, 2011
- Influence of Layer Thickness on Cohesive Properties of an Epoxy-Based Adhesive—An Experimental StudyThe Journal of Adhesion, 2010
- A new data reduction scheme for mode I wood fracture characterization using the double cantilever beam testEngineering Fracture Mechanics, 2008
- Effect of Bond Thickness on Fracture Behaviour in Adhesive JointsThe Journal of Adhesion, 2001
- Mode-l Fracture Behaviour of Adhesive Joints. Part I. Relationship Between Fracture Energy and Bond ThicknessThe Journal of Adhesion, 1995
- Micromechanics of Fracture in Structural Adhesive BondsThe Journal of Adhesion, 1989