Modeling Transient Fuel Effects with Alternative Fuels
Authors:
- 11 April 2005
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
As regulations become more stringent, transient fuel control becomes extremely important for meeting emissions requirements in a cost-effective manner. Significant modeling work has been performed for a variety of conventional gasolines in port fuel injected (PFI) engines. This paper describes an extension of previous modeling work for alternative fuels. The paper first details the application of a distillation model to create the multi-component fuel models used in the simulations. The fuel models are then used in the transient Four Puddle Model to simulate the coupled liquid fuel and thermal/thermodynamic processes in the engine. Simulation results from the model are compared with dynamometer data over a transient, warm-up test.Keywords
This publication has 18 references indexed in Scilit:
- Engine Cycle Simulation of Ethanol and Gasoline BlendsSAE International Journal of Advances and Current Practices in Mobility, 2003
- Mixture Preparation and Hydrocarbon Emissions Behaviors in the First Cycle of SI Engine CrankingSAE International Journal of Advances and Current Practices in Mobility, 2002
- The Effects of Injector Targeting and Fuel Volatility on Fuel Dynamics in a PFI Engine During Warm-up: Part II - Modeling ResultsSAE International Journal of Advances and Current Practices in Mobility, 1998
- The Effects of Injector Targeting and Fuel Volatility on Fuel Dynamics in a PFI Engine During Engine Warm-up: Part I - Experimental ResultsSAE International Journal of Advances and Current Practices in Mobility, 1998
- A New Port and Cylinder Wall Wetting Model to Predict Transient Air/Fuel Excursions in a Port Fuel Injected EngineSAE International Journal of Advances and Current Practices in Mobility, 1996
- Powertrain Development of the 1996 Ford Flexible Fuel TaurusSAE International Journal of Advances and Current Practices in Mobility, 1995
- Cold Starts Using M-85 (85% Methanol): Coping with Low Fuel Volatility and Spark Plug WettingSAE International Journal of Advances and Current Practices in Mobility, 1991
- Transient A/F Characteristics for Cold Operation of a 1.6 Liter Engine with Sequential Fuel InjectionSAE International Journal of Advances and Current Practices in Mobility, 1988
- A Study on Cold Startability and Mixture Formation of High-Percentage Methanol BlendsSAE International Journal of Advances and Current Practices in Mobility, 1988
- Transient A/F Control Characteristics of the 5 Liter Central Fuel Injection EngineSAE International Journal of Advances and Current Practices in Mobility, 1981