After Explosion - Battery Degradation Analysis using DSC and SEM
Open Access
- 25 May 2023
- journal article
- research article
- Published by Universal Wiser Publisher Pte. Ltd in Sustainable Chemical Engineering
- p. 46-56
Abstract
Thermal management of the battery is essential for effective utilization in various environmental conditions and for long-term usage. Failure of controlling and monitoring of battery over-heat leads to thermal runaway which causes battery explosion. This paper emphasizes the overheating phenomena of lead-acid batteries in stimulated heat situations. Heat is applied to the battery until the battery gets damaged. After the thermal damage to the battery, various characterization methods were performed to analyze the thermal influence on the anode and cathode plates. The characteristics methods are Differential Scanning Calorimetry (DSC) and Scanning Electron Microscope (SEM). DSC method is used to find the change in glass transition temperature of anode and cathode materials, which can provide the material thermal behavior over different temperatures. Likewise, SEM is used to investigate the structural morphology of anode and cathode plates. The experimental results are indicating the material degradation improves with different temperature range on both the anode and cathode plates. In particular, plate thermal influence varies at different positions which leads to the change of plate conduction. Additionally, thermography heat distribution images are used to identify the heat flow in the battery during the cycle period.Keywords
This publication has 18 references indexed in Scilit:
- A Critical Review on Electrochemical Properties and Significance of Orthosilicate‐Based Cathode Materials for Rechargeable Li/Na/Mg Batteries and Hybrid SupercapacitorsChemistrySelect, 2021
- A study on the fire behaviors of 18650 battery and batteries pack under dischargeJournal of Thermal Analysis and Calorimetry, 2018
- Structure, dielectric, and temperature-dependent conductivity studies of the Li2FeSiO4/C nano cathode material for lithium-ion batteriesIonics, 2018
- Review on the research of failure modes and mechanism for lead-acid batteriesInternational Journal of Energy Research, 2016
- Characterization of lead (Ⅱ)-containing activated carbon and its excellent performance of extending lead-acid battery cycle life for high-rate partial-state-of-charge operationJournal of Power Sources, 2015
- Lead-Acid Batteries: Science and Technology2011
- Lead-acid battery use in the development of renewable energy systems in ChinaJournal of Power Sources, 2009
- Thermal runaway of valve-regulated lead-acid batteriesJournal of Applied Electrochemistry, 2006
- Thermal runaway in valve-regulated lead-acid cells and the effect of separator structureJournal of Power Sources, 2004
- Failure modes of valve-regulated lead/acid batteriesJournal of Power Sources, 1996