M. Karthigai Pandian
M. Karthigai Pandian has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Arun Samuel Thankamony Sarasam
Department of ECE, National Engineering College, Kovilpatti, India
3 shared publications - Thangam Chinnadurai
Sri Krishna College of Technology
3 shared publications - J. Dhanaselvam
Sri Krishna College of Technology
2 shared publications - K. Saravanakumar
Sri Krishna College of Technology
2 shared publications - M. Venkatesh
Department of Electronics and Communication Engineering, CMR Institute of Technology, Bengaluru, Karnataka, India
2 shared publications - P. Suveetha Dhanaselvam
Velammal College of Engineering and Technology
2 shared publications
Latest Publications
- 27 October 2024
- Published by Wiley in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
- Vol. 37 (6)
Subthreshold Drain Current Model of Cylindrical Gate All‐Around Junctionless Transistor With Three Different Gate Materials
A novel subthreshold drain current model has been developed for a cylindrical gate all‐around junctionless transistor with three different gate materials. The proposed device is built with three gate regions of different work functions that effectively reduce the short‐channel effects caused by quantum mechanical effects. The drain current equation is solved for all three operating regions to investigate the device switching characteristics and minimize the drain‐induced barrier lowering (DIBL), velocity saturation, mobility degradation, and tunneling. It is understood that the triple material gate structure enhances the transport efficiency of the device. The proposed analytical model is validated by comparison with Sentaurus TCAD numerical simulator results and good agreement is found to be achieved.
- 27 October 2024
- Published by Wiley in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
- Vol. 37 (6)
Subthreshold Drain Current Model of Cylindrical Gate All‐Around Junctionless Transistor With Three Different Gate Materials
A novel subthreshold drain current model has been developed for a cylindrical gate all‐around junctionless transistor with three different gate materials. The proposed device is built with three gate regions of different work functions that effectively reduce the short‐channel effects caused by quantum mechanical effects. The drain current equation is solved for all three operating regions to investigate the device switching characteristics and minimize the drain‐induced barrier lowering (DIBL), velocity saturation, mobility degradation, and tunneling. It is understood that the triple material gate structure enhances the transport efficiency of the device. The proposed analytical model is validated by comparison with Sentaurus TCAD numerical simulator results and good agreement is found to be achieved.
- Open Access
- 25 May 2023
- Published by Universal Wiser Publisher Pte. Ltd in Sustainable Chemical Engineering
- p. 46-56
After Explosion - Battery Degradation Analysis using DSC and SEM
Thermal management of the battery is essential for effective utilization in various environmental conditions and for long-term usage. Failure of controlling and monitoring of battery over-heat leads to thermal runaway which causes battery explosion. This paper emphasizes the overheating phenomena of lead-acid batteries in stimulated heat situations. Heat is applied to the battery until the battery gets damaged. After the thermal damage to the battery, various characterization methods were performed to analyze the thermal influence on the anode and cathode plates. The characteristics methods are Differential Scanning Calorimetry (DSC) and Scanning Electron Microscope (SEM). DSC method is used to find the change in glass transition temperature of anode and cathode materials, which can provide the material thermal behavior over different temperatures. Likewise, SEM is used to investigate the structural morphology of anode and cathode plates. The experimental results are indicating the material degradation improves with different temperature range on both the anode and cathode plates. In particular, plate thermal influence varies at different positions which leads to the change of plate conduction. Additionally, thermography heat distribution images are used to identify the heat flow in the battery during the cycle period.
- 25 May 2023
- Published by Universal Wiser Publisher Pte. Ltd in Sustainable Chemical Engineering
- p. 46-56
Open AccessAfter Explosion - Battery Degradation Analysis using DSC and SEM
Thermal management of the battery is essential for effective utilization in various environmental conditions and for long-term usage. Failure of controlling and monitoring of battery over-heat leads to thermal runaway which causes battery explosion. This paper emphasizes the overheating phenomena of lead-acid batteries in stimulated heat situations. Heat is applied to the battery until the battery gets damaged. After the thermal damage to the battery, various characterization methods were performed to analyze the thermal influence on the anode and cathode plates. The characteristics methods are Differential Scanning Calorimetry (DSC) and Scanning Electron Microscope (SEM). DSC method is used to find the change in glass transition temperature of anode and cathode materials, which can provide the material thermal behavior over different temperatures. Likewise, SEM is used to investigate the structural morphology of anode and cathode plates. The experimental results are indicating the material degradation improves with different temperature range on both the anode and cathode plates. In particular, plate thermal influence varies at different positions which leads to the change of plate conduction. Additionally, thermography heat distribution images are used to identify the heat flow in the battery during the cycle period.
- 3 October 2021
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 50 (12) , 7037-7043
Investigation of ON Current and Subthreshold Swing of an InSb/Si Heterojunction Stacked Oxide Double-Gate TFET with Graphene Nanoribbon
- 3 October 2021
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 50 (12) , 7037-7043
Investigation of ON Current and Subthreshold Swing of an InSb/Si Heterojunction Stacked Oxide Double-Gate TFET with Graphene Nanoribbon
- 16 August 2021
- Published by Springer Nature in Silicon
- Vol. 14 (10) , 5311-5318
A 2D Unified Subthreshold Drain Current Investigation for Junctionless Cylindrical Surrounding Gate(JCSG) Silicon Nanowire Transistor
- 16 August 2021
- Published by Springer Nature in Silicon
- Vol. 14 (10) , 5311-5318
A 2D Unified Subthreshold Drain Current Investigation for Junctionless Cylindrical Surrounding Gate(JCSG) Silicon Nanowire Transistor
- 14 August 2021
- Published by Springer Nature in Silicon
- Vol. 13 (10) , 3755-3764
Analytical Modeling and Simulation of Gate-All-Around Junctionless Mosfet for Biosensing Applications
- 14 August 2021
- Published by Springer Nature in Silicon
- Vol. 13 (10) , 3755-3764
Analytical Modeling and Simulation of Gate-All-Around Junctionless Mosfet for Biosensing Applications
- 22 July 2021
- Published by Springer Nature
- p. 1037-1045
Investigating the Ambient Thermal Loading Failure of Lead–Acid Battery Based on Thermal Analysis
- 22 July 2021
- Published by Springer Nature
- p. 1037-1045
Investigating the Ambient Thermal Loading Failure of Lead–Acid Battery Based on Thermal Analysis
- 22 July 2021
- Published by Springer Nature
- p. 1029-1036
Automatic Drip Irrigation Control System for Paddy Fields in Depleting Water Resource Areas
- 22 July 2021
- Published by Springer Nature
- p. 1029-1036
Automatic Drip Irrigation Control System for Paddy Fields in Depleting Water Resource Areas
- 4 November 2019
- Published by Springer Nature in Silicon
- Vol. 12 (8) , 1819-1829
Performance Investigation of Gate Engineered tri-Gate SOI TFETs with Different High-K Dielectric Materials for Low Power Applications
- 4 November 2019
- Published by Springer Nature in Silicon
- Vol. 12 (8) , 1819-1829
Performance Investigation of Gate Engineered tri-Gate SOI TFETs with Different High-K Dielectric Materials for Low Power Applications
- 24 April 2019
- Published by Springer Nature
- p. 771-779
Weld Strength Analysis of Ultrasonic Polymer Welding Using Adaptive Neuro-Fuzzy Inference System
- 24 April 2019
- Published by Springer Nature
- p. 771-779
Weld Strength Analysis of Ultrasonic Polymer Welding Using Adaptive Neuro-Fuzzy Inference System
- 31 December 2015
- Published by Trans Tech Publications, Ltd. in Journal of Nano Research
- Vol. 41, 1-8
Comparative Performance Analysis of Multi Gate Tunnel Field Effect Transistors
In this paper, analytical modelling and performance analysis of novel device structures such as single gate SOI Tunnel Field Effect transistor (SG SOI TFET), Dual-Material Gate TFET (DMG TFET) and Dual Material Double Gate TFET (DMDG TFET) are proposed. The performance of the three devices is studied and compared in terms of surface potential, electric field and drain current. The DMDG TFET shows better performance in suppressing leakage current and enhancing ION current than the SG SOI TFET and DMG TFET. The analytical models of the devices are found to be in good agreement with the results obtained using two-dimensional TCAD device simulator.
- 31 December 2015
- Published by Trans Tech Publications, Ltd. in Journal of Nano Research
- Vol. 41, 1-8
Comparative Performance Analysis of Multi Gate Tunnel Field Effect Transistors
In this paper, analytical modelling and performance analysis of novel device structures such as single gate SOI Tunnel Field Effect transistor (SG SOI TFET), Dual-Material Gate TFET (DMG TFET) and Dual Material Double Gate TFET (DMDG TFET) are proposed. The performance of the three devices is studied and compared in terms of surface potential, electric field and drain current. The DMDG TFET shows better performance in suppressing leakage current and enhancing ION current than the SG SOI TFET and DMG TFET. The analytical models of the devices are found to be in good agreement with the results obtained using two-dimensional TCAD device simulator.