One‐to‐One Comparison of Graphite‐Blended Negative Electrodes Using Silicon Nanolayer‐Embedded Graphite versus Commercial Benchmarking Materials for High‐Energy Lithium‐Ion Batteries
- 24 April 2017
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 7 (15)
Abstract
While existing carbonaceous anodes for lithium–ion batteries (LIBs) are approaching a practical capacitive limit, Si has been extensively examined as a potential alternative because it shows exceptional gravimetric capacity (3579 mA h g−1) and abundance. However, the actual implementation of Si anodes is impeded by difficulties in electrode calendering processes and requirements for excessive binding and conductive agents, arising from the brittleness, large volume expansion (>300%), and low electrical conductivity (1.56 × 10−3 S m−1) of Si. In one rational approach to using Si in high‐energy LIBs, mixing Si‐based materials with graphite has attracted attention as a feasible alternative for next‐generation anodes. In this study, graphite‐blended electrodes with Si nanolayer‐embedded graphite/carbon (G/SGC) are demonstrated and detailed one‐to‐one comparisons of these electrodes with industrially developed benchmarking samples are performed under the industrial electrode density (>1.6 g cc−1), areal capacity (>3 mA h cm−2), and a small amount of binder (3 wt%) in a slurry. Because of the favorable compatibility between SGC and conventional graphite, and the well‐established structural features of SGC, great potential is envisioned. Since this feasible study utilizes realistic test methods and criteria, the rigorous benchmarking comparison presents a comprehensive understanding for developing and characterizing Si‐based anodes for practicable high‐energy LIBs.Keywords
This publication has 40 references indexed in Scilit:
- Electrochemical energy storage to power the 21st centuryMRS Bulletin, 2011
- Si–graphite composites as anode materials for lithium secondary batteriesJournal of Power Sources, 2010
- Characterizations and electrochemical behaviors of disproportionated SiO and its composite for rechargeable Li-ion batteriesJournal of Materials Chemistry, 2010
- Spherical silicon/graphite/carbon composites as anode material for lithium-ion batteriesJournal of Power Sources, 2008
- Practical silicon-based composite anodes for lithium-ion batteries: Fundamental and technological featuresJournal of Power Sources, 2007
- Electrochemical behaviors of silicon based anode materialJournal of Power Sources, 2006
- Optimized Structure of Silicon/Carbon/Graphite Composites as an Anode Material for Li-Ion BatteriesJournal of the Electrochemical Society, 2006
- Analysis of SiO Anodes for Lithium-Ion BatteriesJournal of the Electrochemical Society, 2005
- Characterization of carbon-coated siliconJournal of Power Sources, 2003
- High capacity silicon/carbon composite anode materials for lithium ion batteriesElectrochemistry Communications, 2003