Real-Time IMEP Estimation and Control Using an In-Cylinder Pressure Sensor for a Common-Rail Direct Injection Diesel Engine
- 14 February 2011
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 133 (6) , 062801
Abstract
An in-cylinder pressure-based control method is capable of improving engine performance, as well as reducing harmful emissions. However, this method is difficult to be implemented in a conventional engine management system due to the excessive data acquisition and long computation time. In this study, we propose a real-time indicated mean effective pressure (IMEP) estimation method using cylinder pressure in a common-rail direct injection diesel engine. In this method, difference pressure integral (DPI) was applied to the estimation. The DPI requires only 180 pressure data points during one engine cycle from top dead center to bottom dead center when pressure data are captured at every crank angle. Therefore, the IMEP can be estimated in real time. To further reduce the computational load, the IMEP was also estimated using DPI at 2 deg, 3 deg, and 4 deg crank angle resolutions. Furthermore, based on the estimated IMEP, we controlled IMEP using a radial basis function network and linear feedback controller. As a result of the study, successful estimation and control were demonstrated through engine experiments.Keywords
This publication has 24 references indexed in Scilit:
- An Accurate Torque-based Engine Control by Learning Correlation between Torque and Throttle PositionSAE International Journal of Advances and Current Practices in Mobility, 2008
- Engine Torque Control Variation AnalysisSAE International Journal of Advances and Current Practices in Mobility, 2008
- A simple method for robust control design, application on a non-linear and delayed system: engine torque controlControl Engineering Practice, 2004
- Validation and Calibration Process of Powertrain Model for Engine Torque Control DevelopmentSAE International Journal of Advances and Current Practices in Mobility, 2004
- High Frequency IMEP Estimation and Filtering for Torque Based SI Engine ControlSAE International Journal of Advances and Current Practices in Mobility, 2002
- An Approach to Torque-Based Engine Management SystemsSAE International Journal of Advances and Current Practices in Mobility, 2001
- Engine Control Using Torque EstimationSAE International Journal of Advances and Current Practices in Mobility, 2001
- Design of An IC Engine Torque Estimator Using Unknown Input ObserverJournal of Dynamic Systems, Measurement, and Control, 1999
- Cylinder by Cylinder Engine Pressure and Pressure Torque Waveform Determination Utilizing Speed FluctuationsSAE International Journal of Advances and Current Practices in Mobility, 1989
- Estimate of indicated torque from crankshaft speed fluctuations: a model for the dynamics of the IC engineIEEE Transactions on Vehicular Technology, 1989