High‐Strength Wear‐Resistant Cu/Tungsten Carbide/Diamond Composites Fabricated by Powder Metallurgy
- 23 April 2024
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (11)
Abstract
Copper‐based diamond composites are widely used for thermal management and wear‐resistant materials. In this work, Cu/diamond, Cu/tungsten carbide (WC)/diamond, and Cu–0.92Cr/WC/diamond composites are fabricated by high‐energy ball milling and rapid hot‐pressing sintering. Physical characteristics, compressive strength, and tribological properties of the studied composites are investigated. The compressive strength of Cu/7wt%WC/diamond composites is 102% higher than the Cu/diamond composites, reaching 415 MPa. Compression fractures extend from the interface due to compression cracks, consistent with the compression curves from molecular dynamics (MD) simulations. The crack propagates from the interface during the compression experiment, which is consistent with the result of MD simulation. The Cu/7wt%WC/diamond composites exhibit a wear rate of 0.6 × 10−6 mm3 (N m)−1 and a friction coefficient of 0.37 at 50 N. The addition of WC and diamond improves the compressive strength and wear resistance. These findings are helpful in the development of copper composites with high compression strength and wear resistance.Keywords
Funding Information
- National Natural Science Foundation of China (51901250)
This publication has 49 references indexed in Scilit:
- The wear and arc erosion behavior of novel copper based functionally graded electrical contact materials fabricated by hot pressing assisted electroless platingAdvanced Powder Technology, 2021
- Unveiling the interface characteristics and their influence on the heat transfer behavior of hot-forged Cu–Cr/Diamond compositesCarbon, 2021
- High thermal conductivity and strong interface bonding of a hot-forged Cu/Ti-coated-diamond compositeCarbon, 2020
- Adhesion, bonding and mechanical properties of Mo doped diamond/Al (Cu) interfaces: A first principles studyApplied Surface Science, 2020
- Effect of Ti interlayer on interfacial thermal conductance between Cu and diamondActa Materialia, 2018
- When twins collide: Twin junctions in nanocrystalline nickelActa Materialia, 2016
- Thermal boundary conductance between refractory metal carbides and diamondActa Materialia, 2014
- Diamond–metal interfaces in cutting tools: a reviewJournal of Materials Science, 2011
- Wear Behavior of the Lead-Free Tin Bronze Matrix Composite Reinforced by Carbon NanotubesMetallurgical and Materials Transactions A, 2011
- The role of equiaxed particles on the yield stress of compositesScripta Metallurgica et Materialia, 1991