Properties of Zr–Ti–Nb and Ti–Al–V alloys
Authors:
- Ukrainian State University of Science and TechnologiesUTUkrainian State University of Science and Technologies
- S.V. KovalyovSKS.V. Kovalyov
- O.V. OvchynnykovOOO.V. Ovchynnykov
- K.M. SukhyyKSK.M. Sukhyy
- V.S. YefanovVYV.S. Yefanov
- O.O. KalinichenkoOKO.O. Kalinichenko
- N.V. Koval'OVaNKN.V. Koval'OVa
- 1 December 2024
- journal article
- Published by SHEI Ukrainian State University of Chemical Technology in Voprosy Khimii i Khimicheskoi Tekhnologii
- No. 6
Abstract
This article is devoted to studying the properties of the new Zr–Ti–Nb alloy and comparing it with the well-known Ti–Al–V alloy (ВТ-6, Grade 5 analog). The properties were analyzed through chemical composition determination and corrosion resistance assessment. The Zr–Ti–Nb alloy does not contain the toxic impurities present in the Ti–Al–V alloy, specifically aluminum and vanadium. Structural studies were conducted to identify the phases (X-ray diffraction analysis) and their composition using scanning electron microscopy. The microstructure and phase composition of the Zr–Ti–Nb alloy indicated a uniform distribution of elements throughout the alloy. The wetting angle of the Zr–Ti–Nb alloy with an oxide layer is significantly smaller than that of the Ti–Al–V alloy, suggesting greater hydrophilicity. Physical research methods included determining density, reflectivity, and electrical conductivity. Mechanical properties were examined by determining the elastic modulus, strength limit, yield strength, longitudinal elongation, transverse contraction, and microhardness. Notably, the elastic modulus of the Zr–Ti–Nb alloy is 26.4 GPa, similar to that of cortical bone, in contrast to the Ti–Al–V alloy, which has an elastic modulus of 110–140 GPa. The obtained data indicate that the superior chemical and mechanical properties of the Zr–Ti–Nb alloy make it suitable for medical applications.This publication has 15 references indexed in Scilit:
- Antibacterial Ti-35Nb-7Zr-xCu alloy with excellent mechanical properties generated with a spark plasma sintering method for biological applicationsJournal of Alloys and Compounds, 2021
- Copper electrodeposition under a weak magnetic field: effect on the texturing and properties of the depositsJournal of Applied Electrochemistry, 2020
- Titanium for Orthopedic Applications: An Overview of Surface Modification to Improve Biocompatibility and Prevent Bacterial Biofilm FormationiScience, 2020
- Breaking the limit of Young’s modulus in low-cost Ti–Nb–Zr alloy for biomedical implant applicationsJournal of Alloys and Compounds, 2020
- Enhancement of the biocompatibility by surface nitriding of a low‐modulus titanium alloy for dental implant applicationsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2018
- Cytocompatibility assessment of Ti‐Zr‐Pd‐Si‐(Nb) alloys with low Young's modulus, increased hardness, and enhanced osteoblast differentiation for biomedical applicationsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2017
- On the role of Nb-related sites of an oxidized β-TiNb alloy surface in its interaction with osteoblast-like MG-63 cellsMaterials Science and Engineering: C, 2013
- Biocompatibility of Ti-alloys for long-term implantationJournal of the Mechanical Behavior of Biomedical Materials, 2013
- Structure and Properties of Titanium and Titanium Alloys2003
- Mechanical properties of biomedical titanium alloysMaterials Science and Engineering: A, 1998