Characterisation of asphalt binder modified with ethylene–propylene–diene–monomer (EPDM) rubber waste from automobile industry
- 19 March 2020
- journal article
- research article
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 22 (9) , 2044-2068
Abstract
Ethylene–propylene–diene–monomer (EPDM) is a high-quality synthetic rubber widely used in non-tyre automotive parts. Waste EPDM rubber is generated at several industries, manufacturing units, and automobile repair/service stations. The present study aims at the evaluation of asphalt binders and mixes with waste EPDM as a modifier. Modification was attempted with four EPDM contents (2%, 4%, 6% and 8% by binder weight). Storage stability was checked for the modified blends with and without a crosslinking agent (sulphur). Binder characterisation was done through penetration, softening point, temperature and frequency sweeps, master curve, multiple stress creep recovery, Burger’s model fit, and binder yield energy tests. Performance of bituminous mixtures with EPDM-modified binders was also evaluated through Hamburg wheel tracking, stiffness modulus, and indirect tensile strength tests. The incorporation of EPDM enhanced the rutting and fatigue performance of the binder. Mixtures showed better stiffness, rutting resistance and tensile strength compared to those with control mixes.Keywords
This publication has 36 references indexed in Scilit:
- A review of using waste and virgin polymer in pavementConstruction and Building Materials, 2012
- Novel recycled polyethylene/ground tire rubber/bitumen blends for use in roofing applications: Thermo-mechanical propertiesPolymer Testing, 2010
- The research for high-performance SBR compound modified asphaltConstruction and Building Materials, 2010
- Storage Stability of SBS-Modified Road Asphalt: Preparation, Morphology, and Rheological PropertiesPetroleum Science and Technology, 2006
- The influence of crumb rubber modifier (CRM) microstructures on the high temperature properties of CRM bindersInternational Journal of Pavement Engineering, 2005
- Polyethylene dispersions in bitumen: The effects of the polymer structural parametersJournal of Applied Polymer Science, 2003
- Absorption of Bitumen into Crumb Rubber Using the Basket Drainage MethodInternational Journal of Pavement Engineering, 2003
- Rheological evaluation of ethylene vinyl acetate polymer modified bitumensConstruction and Building Materials, 2002
- Macromolecular modification of EPDM: Wettability, miscibility, and morphology studyJournal of Applied Polymer Science, 2001
- Bitumens modified with recycled polymersMaterials and Structures, 2000