Purpose. To assess the stiffness of backfill masses made of crushed rock with polyfraction-al composition under conditions of complete gob backfilling, to prevent roof collapses in the extraction sections of coal mines. Methods. To simulate complete gob backfilling with crushed rock, compressive compac-tion was applied to scaled model materials with polyfractional grain-size compositions of (0.1–5) mm, (1–5) mm, and (2–5) mm. The deformation process in the backfill masses was examined through laboratory testing of experimental models in a compression device on a hydraulic press. Results. Under compressive compaction of crushed rock with polyfractional composition, displacement restriction during gradual loading occurs when the relative deformation of the backfill mass reaches λ = 0.37–0.38, and the compaction coefficient of the material is kc = 1.59–1.62. The artificially created mass attains maximum stiffness at the highest values of the relative change in rock volume per unit of convergence, ΔVₖ (m⁻¹). The growth rate of ΔVₖ characterizes the process of rearrangement and compaction of the crushed rock and depends on its grain-size distribution. The parameter ΔVₖ serves as an informative indicator of the deformation behavior of the backfill material, since it increases hyperbolically as it approaches the limit values of stiffness. Novelty. A hyperbolic relationship has been established between the relative change in rock volume per unit of convergence ΔVₖ and the stiffness of a backfill mass composed of polyfractional crushed rock under compressive compaction. Practical significance. The stiffness of the backfill mass determines the intensity of roof displacements in the gob areas of longwall panels. Maximum stiffness of the artificially created mass is achieved by a material that possesses a reserve of compaction associated with the rear-rangement of crushed-rock grains.