Development of Inductive Current Transformer 400/5/1 of Class 0.2S for Frequency Range 50 Hz–5 kHz
Open Access
Abstract
This paper is devoted to the development of a window-type inductive current transformer (iCT) with a rated primary current equal to 400 A and two secondary windings with rated currents of 5 A and 1 A. Its novelty concerns the presentation of this process in the case of an iCT with a 0.2S accuracy class ensured not only for a sinusoidal current of a frequency of 50 Hz but also for the transformation of distorted current in the harmonic frequency range from 50 Hz to 5 kHz. The maximum permissible values of the current error and phase displacement are equal to ±0.2% and ±0.2°, respectively, and are the same as the limiting values for a 50 Hz sinusoidal current of a rated RMS value. In the design process, three materials were considered for the construction of the developed iCT 400/5/1: electrical steel, permalloy and nanocrystalline (Nano). Their wideband properties were analyzed and the choice of the Nano magnetic core was justified with the already-available data in the literature on the basis of elaborated design assumptions. In order to specify its particular type, four magnetic cores with different initial magnetic permeabilities were tested. It was demonstrated that, as far as more favorable magnetic properties also involved increased active power losses in the magnetic core, it was not an appropriate choice for the construction of the iCT, especially for the transformation of the current with a main frequency equal to 50 Hz or 60 Hz.Keywords
This publication has 26 references indexed in Scilit:
- Effects of mixed electronic loads on the electrical energy systems considering different loading conditions with focus on power quality and billing issuesApplied Energy, 2020
- Behaviour of measuring current transformers with cores composed from different magnetic materials at non‐rated loads and overcurrentsIET Science, Measurement & Technology, 2019
- Nanocrystalline oval cut cores for current instrument transformer prototypesMeasurement, 2019
- Compensation of Nonlinearity of Voltage and Current Instrument TransformersIEEE Transactions on Instrumentation and Measurement, 2018
- Analysis and Mitigation of Power Quality Issues in Distributed Generation Systems Using Custom Power DevicesIEEE Access, 2018
- Inductive current transformer accuracy of transformation for the PQ measurementsElectric Power Systems Research, 2017
- Development and application of the differential voltage to single-ended voltage converter to determine the composite error of voltage transformers and dividers for transformation of sinusoidal and distorted voltagesMeasurement, 2017
- Some remarks on metrological properties and production technology of current transformers made of nanocrystalline coresMeasurement, 2017
- Emerging Power Quality Challenges Due to Integration of Renewable Energy SourcesIEEE Transactions on Industry Applications, 2016
- Operation of inductive protective current transformer in condition of distorted current transformation2015