Thermoforming Simulation of Woven Carbon Fiber Fabric/Polyurethane Composite Materials
Open Access
- 3 January 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (1) , 445
Abstract
A finite element simulation was utilized in this work to analyze the thermoforming process of woven carbon fiber fabric/polyurethane thermoplastic composite sheets. In the simulation that may be classified as a discrete method, the woven carbon fiber fabric was treated as an undulated fill yarn crossed over an undulated warp yarn, and the resin was considered separately. Then, they were combined to represent the composite sheets. To verify this simulation, bias extension tests under three constant temperatures were executed. After that, the composite was thermoformed into a U-shaped structure and small luggage. From the bias extension tests, the finite element simulation and material properties of the fiber and resin were confirmed. From the comparison of the thermoformed products, the present simulation could provide the deformed profile and fiber-included angles and has good agreement with the experiment. The results also indicate that the stacking sequences of [(0°/90°)]4 and [(+45°/−45°)]4 have quite different product profiles and fiber-included angles.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST 108-2221-E-224-032-MY3)
This publication has 24 references indexed in Scilit:
- Forming of carbon fiber reinforced thermoplastic composite tubes – Experimental and numerical approachesCIRP Journal of Manufacturing Science and Technology, 2017
- A thermo-viscoelastic approach for the characterization and modeling of the bending behavior of thermoplastic compositesComposites Part A: Applied Science and Manufacturing, 2016
- On the characterisation of transverse tensile properties of molten unidirectional thermoplastic composite tapes for thermoforming simulationsComposites Part A: Applied Science and Manufacturing, 2016
- Thermomechanical analysis, modelling and simulation of the forming of pre-impregnated thermoplastics compositesComposites Part A: Applied Science and Manufacturing, 2015
- Thermoforming simulation of multilayer composites with continuous fibres and thermoplastic matrixComposites Part B: Engineering, 2013
- Hyperelastic modelling for mesoscopic analyses of composite reinforcementsComposites Science and Technology, 2011
- Textile composite double dome stamping simulation using a non-orthogonal constitutive modelComposites Science and Technology, 2011
- Validation of a non-orthogonal constitutive model for woven composite fabrics via hemispherical stamping simulationComposites Part A: Applied Science and Manufacturing, 2011
- Simulations of textile composite reinforcement draping using a new semi-discrete three node finite elementComposites Part B: Engineering, 2008
- A continuum mechanics-based non-orthogonal constitutive model for woven composite fabricsComposites Part A: Applied Science and Manufacturing, 2005