Effect of slag basicity and reduction time on carbothermal reduction behaviour of P-bearing steelmaking slag
Authors:
- 25 September 2022
- journal article
- research article
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
- Vol. 50 (4) , 350-359
Abstract
To realize the efficient reduction and recycling of phosphorus resources in P-bearing steelmaking slag, it is necessary to study slag composition and phase changes during carbothermal reduction under different conditions (slag basicity and reduction time). The thermodynamic and kinetic behaviours of carbothermal reduction dephosphorization of P-bearing steelmaking slag are systematically discussed as well. The results show that the reduction rate of FeO and P2O5 show an upward trend with the increase of reduction time at 1823 K. However, the reduction rate of FeO does not change much within 50 minutes. In the range of slag basicity from 0.5 to 2.5, the formation of Ca3(PO4)2 increases with the increase of slag basicity. However, the increase of slag basicity is not good for the occurrence of carbothermic reduction gasification dephosphorization reaction. Taking into account the higher formation of Ca3(PO4)2 and the better dephosphorization effect of carbothermic reduction gasification, the appropriate slag basicity for carbothermic reduction gasification dephosphorization is 1.0–1.5. Carbothermal reduction gasification dephosphorization reaction of P-bearing steelmaking slag is a second-order reaction, and the mass transfer of P2O5 in the slag is the rate-limiting step of the whole process. The kinetic equations that describe the variation of P2O5 content in slag with time are yielded through regression. At 1823 K, by controlling the appropriate slag basicity (1.0–1.5) and reduction time (at least 20 minutes), the gasification dephosphorization rate of the carbothermal reduction can reach more than 80%, which can realize efficient recovery of phosphorus resources in P-bearing steelmaking slag.Keywords
Funding Information
- National Natural Science Foundation of China (51704080, 51874102, 51704085)
This publication has 16 references indexed in Scilit:
- Modifying hot slag and converting it into value-added materials: A reviewJournal of Cleaner Production, 2018
- Effect of Slag Composition on Phosphorus Separation from Steelmaking Slag by ReductionISIJ International, 2017
- Effects of basicity, MgO and MnO on mineralogical phases of CaO–FeOx–SiO2–P2O5 slagIronmaking & Steelmaking: Processes, Products and Applications, 2016
- P2O5 Solubility Behavior and Resource Utilization of P-Bearing SlagISIJ International, 2014
- Influence of Al2O3modification on phosphorus enrichment in P bearing steelmaking slagIronmaking & Steelmaking: Processes, Products and Applications, 2013
- An Overview of Utilization of Steel SlagProcedia Environmental Sciences, 2012
- Distribution and enrichment of phosphorus in solidified BOF steelmaking slagIronmaking & Steelmaking: Processes, Products and Applications, 2011
- Condensation of P2O5 at the Interface between 2CaO·SiO2 and CaO–SiO2–FeOx–P2O5 SlagISIJ International, 2009
- Formation Reaction of Phosphate Compound in Multi Phase Flux at 1573 KISIJ International, 2007
- Slags and fluxes entering the new millennium, an analysis of recent trends in research and developmentIronmaking & Steelmaking: Processes, Products and Applications, 2005