Investigation of Nanosized-Scandia-Doped Dispenser Cathodes With Machined Surfaces
Authors:
- 14 March 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 63 (4) , 1728-1733
Abstract
Since the cathodes with machined surfaces are required for the practical applications in some high-power vacuum electron devices, the characteristics of nanosized-scandia-doped dispenser (SDD) cathodes with machined surfaces have been investigated, especially in dc applications. In order to reopen the surface pores, which may be smeared by machining procedure, the cathode surface was washed by Ethylene Diamine Tetraacetic Acid (EDTA) solution and prolonged time was taken for the cathode activation. The emission test results show that the SDD cathodes with machined surfaces exhibit better emission performances after treatment. The space-charge-limited dc emission current density of over 20 A/cm 2 at 900°C b has been measured with temperature compensation for electron cooling after full activation. An on-going life test with a dc load of up to 40 A/cm 2 at 970°C b has been completed ~5000 h of operation to date. Since the emission capability can be fully restored after exposing to air and reactivating for a short time, a preheating procedure is favorable for SDD cathode with machined surface in the practical applications. Surface analysis indicates that a recrystallization of tungsten grains occurs during the prolonged heating process, leading to further reopening of the surface pores. As a result, cathode surface is covered uniformly by active elements of Ba and Sc (as well as O) as on an unmachined surface, thereby maintaining the high emission property of the SDD cathode.Keywords
Funding Information
- National Natural Science Foundation of China (51471006, 51534009, 51225402)
- 863 program of China (2014AA8126033)
- Doctoral Fund of Innovation of Beijing University of Technology
This publication has 12 references indexed in Scilit:
- Observations on cutting edge radius effects in cryogenic machining of porous tungsten2015
- A Study of Scandia-Doped-Impregnated Cathode Fabricated by Spray Drying MethodIEEE Transactions on Electron Devices, 2015
- DC Emission Characteristic of Nanosized-Scandia-Doped Impregnated Dispenser CathodesIEEE Transactions on Electron Devices, 2014
- Effect of scandia doping method on the emission uniformity of scandate cathode with Sc2O3–W matrixMaterials Research Bulletin, 2013
- Emission mechanism of high current density scandia-doped dispenser cathodesJournal of Vacuum Science & Technology B, 2011
- Emission Characteristics of Nanosized Scandia-Doped Dispenser Cathodes in Open Electron-Gun StructuresIEEE Transactions on Electron Devices, 2011
- Correlation Between Emission Behavior and Surface Features of Scandate CathodesIEEE Transactions on Electron Devices, 2009
- Sc2O3–W matrix impregnated cathode with spherical grainsJournal of Physics and Chemistry of Solids, 2008
- Development of High Current-Density Cathodes With Scandia-Doped Tungsten PowdersIEEE Transactions on Electron Devices, 2007
- Predicting cathode life expectancy and emission quality from PWFD measurementsApplied Surface Science, 1997