Design and Development of Magnetostrictive Actuators and Sensors for Structural Health Monitoring
Open Access
Abstract
Carbon Fibre Reinforced Polymer composite (CFRP) is widely used in the aerospace industry, but is prone to delamination, which is a major causes of failure. Structural Health Monitoring (SHM) systems need to be developed to determine the damage occurring within it. Our motivation is to design cost-effective new sensors and a data acquisition system for magnetostrictive structural health monitoring of aerospace composites using a simple RLC circuit. The developed system is tested on magnetostrictive FeSiB and CoSiB actuator ribbons using a bending rig. Our results show detectable sensitivity of inductors as low as 0.6 μH for a bending rig radii between 600 to 300 mm (equivalent to 0.8 to 1.7 mStrain), which show a strain sensitivity resolution of 0.01 μStrain (surface area: ~36 mm2). This value is at the detectability limit of our fabricated system. The best resolution (1.86 μStrain) was obtained from a 70-turn copper (~64 μH) wire inductor (surface area: ~400 mm2) that was paired with a FeSiB actuator.Keywords
This publication has 31 references indexed in Scilit:
- Diagnostics for piezoelectric transducers under cyclic loads deployed for structural health monitoring applicationsSmart Materials and Structures, 2013
- An overview of magnetostriction, its use and methods to measure these propertiesJournal of Materials Processing Technology, 2007
- Delamination Detection of a Laminated Beam Using Magnetostrictive Composite Sensor and ActuatorJournal of Reinforced Plastics and Composites, 2007
- Induction coil sensors—a reviewMeasurement Science and Technology, 2007
- Damage prognosis: the future of structural health monitoringPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2006
- Health monitoring of composites embedded with magnetostrictive thick film without disassemblySmart Materials and Structures, 2005
- Detection of impact damage of stiffened composite panels using embedded small-diameter optical fibersSmart Materials and Structures, 2004
- Damage detection and assessment in fibre-reinforced composite structures with embedded fibre optic sensors-reviewSmart Materials and Structures, 2002
- Sensing of Delaminations in Composite Laminates using Embedded Magnetostrictive Particle LayersJournal of Intelligent Material Systems and Structures, 1999
- Delamination—a damage mode in composite structuresEngineering Fracture Mechanics, 1988