Titanium Silicide on Si:P With Precontact Amorphization Implantation Treatment: Contact Resistivity Approaching $1 \times 10^{-9}$ Ohm-cm2
- 31 October 2016
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 63 (12) , 4632-4641
Abstract
In recent CMOS technology, extreme shrinking of contact area at source/drain regions raises serious concerns of high metal/semiconductor contact resistance. Confronting this problem, we introduce a precontact amorphization implantation plus Ti silicidation technique (PCAI + TiSi x ) and achieve ultralow contact resistivity (ρ c ) of (1.3 - 1.5) × 10 -9 Ω · cm 2 on Si:P. This PCAI + TiSi x technique utilizes light amorphization (low-energy implantation), thin Ti and TiSi x film, and moderate thermal budget (500°C-550°C): these features are compatible with modern CMOS manufacturing. Moreover, the PCAI + TiSi x -induced ρ c reduction is proved universal on both n- and p-Si. With additional characterizations, we find that the silicidation-induced ρ c variation is not merely a Schottky barrier height tuning effect. The electrical and physical characterizations suggest that the low ρ c is strongly correlated with the formation of interfacial TiSi x crystallites between amorphous TiSi alloy and Si.Keywords
Funding Information
- imec’s Core Program on LOGIC DEVICES
This publication has 41 references indexed in Scilit:
- Fermi level depinning and contact resistivity reduction using a reduced titania interlayer in n-silicon metal-insulator-semiconductor ohmic contactsApplied Physics Letters, 2014
- Numerical study of reduced contact resistance via nanoscale topography at metal/semiconductor interfacesSemiconductor Science and Technology, 2009
- Formation of Ti silicide nanocrystals in the amorphous interlayers in ultrahigh-vacuum-deposited Ti thin films on (001)SiJournal of Applied Physics, 2005
- Electronic structure and bonding properties of titanium silicidesPhysical Review B, 1998
- Phase formation in the interfacial reactions of ultrahigh vacuum deposited titanium thin films on (111)SiJournal of Applied Physics, 1992
- Modeling of agglomeration in polycrystalline thin films: Application to TiSi2 on a silicon substrateJournal of Applied Physics, 1992
- The Effects of Titanium Silicide Formation on Dopant RedistributionJournal of the Electrochemical Society, 1988
- Boron, phosphorus, and arsenic diffusion in TiSi2Journal of Applied Physics, 1986
- Growth of titanium silicide on ion-implanted siliconJournal of Applied Physics, 1983
- Refractory Silicides of Titanium and Tantalum for Low-Resistivity Gates and InterconnectsIEEE Journal of Solid-State Circuits, 1980