Bearing Surfaces for Total Hip Arthroplasty
Authors:
- Paul F. LachiewiczPLPaul F. Lachiewicz
- Lindsay T. KleemanLKLindsay T. Kleeman
- Thorsten SeylerTSThorsten Seyler
- 15 January 2018
- journal article
- review article
- Published by Wolters Kluwer Health in Journal of the American Academy of Orthopaedic Surgeons
- Vol. 26 (2) , 45-57
Abstract
Metal-on–highly cross-linked polyethylene is considered the preferred bearing surface for conventional total hip arthroplasty because of its safety profile and excellent results in the first 10 to 15 years of use. However, with younger patient age, activity expectations increase, and the life expectancy of patients with total hip arthroplasty also has increased, so interest remains in other bearing couples. These other options include the use of various ceramic composites for the femoral head on highly cross-linked polyethylene, the so-called second-generation antioxidant polyethylenes, and ceramic acetabular liners. Several of these bearing couples have shown excellent wear rates in vitro, and short-term clinical studies have demonstrated favorable wear and safety results. It is uncertain whether any of these bearing couples should be adopted at present. Understanding the unique properties and possible complications of these bearing couples is critical for appropriate implant selection.Keywords
This publication has 52 references indexed in Scilit:
- Trunnionosis in total hip arthroplasty: a reviewJournal of Orthopaedics and Traumatology, 2016
- Vitamin-E diffused highly cross-linked polyethylene liner compared to standard liners in total hip arthroplasty. A randomized, controlled trialInternational Orthopaedics, 2015
- Ceramic on ceramic hip prostheses: a review of past and modern materialsArchives of orthopaedic and trauma surgery, 2014
- Results at a minimum of 10years of follow-up for AMS and PerFix HA-coated cementless total hip arthroplasty: impact of cross-linked polyethylene on implant longevityJournal of Orthopaedic Science, 2013
- A randomised prospective evaluation of ceramic-on-ceramic and ceramic-on-highly cross-linked polyethylene bearings in the same patients with primary cementless total hip arthroplastyInternational Orthopaedics, 2013
- Long-term results of cementless hip arthroplasty with ceramic-on-ceramic articulationInternational Orthopaedics, 2012
- Wear resistant performance of highly cross‐linked and annealed ultra‐high molecular weight polyethylene against ceramic heads in total hip arthroplastyJournal of Orthopaedic Research, 2012
- Long-term results of 32-mm alumina-on-alumina THA for avascular necrosis of the femoral headJournal of Orthopaedics and Traumatology, 2012
- High survival in young patients using a second generation uncemented total hip replacementInternational Orthopaedics, 2011
- Excellent results with cementless total hip arthroplasty and alumina-on-alumina pairing: minimum ten-year follow-upInternational Orthopaedics, 2010