Influence of Low Inlet Pressure and Temperature on the Compressor Map Limits of Electrical Turbo Chargers for Airborne Fuel Cell Applications
Open Access
Abstract
For the optimal high-efficiency operation of a PEM fuel cell system, the temperature, pressure, humidity and mass flow of the supplied air must be tuned to the fuel cell stack requirements. Especially for aircraft applications, this requires a thorough understanding of the fuel cell air supply system behavior and how it changes when the ambient pressure is below 1 bar(a) during flight. This work investigates the influence of low inlet pressures and varying inlet temperatures on the compression map of an electrical turbo charger. This is especially relevant in airborne fuel cell application and not much literature can be found on that topic. Compressor limits are evaluated experimentally and theoretically. The theory of mass flow and speed correction is compared to experimental findings and found to be applicable for the surge and speed limit of the investigated turbo chargers as long as the compressor map is not limited by the power of the electric motor and inverter. Based on this, a prediction of the compressor map for altitudes up to 10,000 m is made with the help of a developed software tool.Keywords
Funding Information
- Bundesministerium für Wirtschaft und Energie (20Y1701B)
- German Federal Ministry for Transport and Digital Infrastructure (03B10703A)
This publication has 14 references indexed in Scilit:
- Optimal operating conditions of PEM fuel cells in commercial aircraftInternational Journal of Hydrogen Energy, 2021
- Influence of pressure losses on compressor performance in a pressurized fuel cell air supply system for airplane applicationsInternational Journal of Hydrogen Energy, 2021
- The contribution of global aviation to anthropogenic climate forcing for 2000 to 2018Atmospheric Environment, 2021
- Loss development analysis of a micro-scale centrifugal compressorEnergy Conversion and Management, 2018
- Air Breathing PEM Fuel Cells in AviationECS Transactions, 2016
- The impact of operating parameters and system architecture on the water management of a multifunctional PEMFC systemInternational Journal of Hydrogen Energy, 2015
- Brennstoffzellensysteme in der Luftfahrt2015
- Experimental analysis on the performance of a turbocharger compressor in the unstable operating region and close to the surge limitExperimental Thermal and Fluid Science, 2014
- Performance Assessment of Turbocharged Pem Fuel Cell Systems for Civil Aircraft Onboard Power ProductionJournal of Engineering for Gas Turbines and Power, 2008
- Study of gas pressure and flow rate influences on a 500W PEM fuel cell, thanks to the experimental design methodologyJournal of Power Sources, 2006