Torque Characteristics of the Revolving Vane Air Expander
Open Access
Abstract
The use of compressed air as an alternative source of clean energy requires an air expander to extract work. A new design, known as the revolving vane mechanism, has been proposed in an effort to develop high efficiency rotary machines. This paper provides an in-depth analysis by including the vibration characteristics of the revolving vane air expander to evaluate the steady-state operating output torque. A generic model for describing the revolving vane rotational vibration is first derived and subsequently modified to describe the prototype tested. Measurements show that the output torque is bimodal; arising from a tolerance gap between the vane and its slot during fabrication. This effect was found to be less pronounced at high operating speeds. The model is found to be in good agreement with the measured output torques. Further analysis with the validated model showed that extracting shaft work from the cylinder would result in better performance.Keywords
Funding Information
- Technical University of Munich - Campus for Research Excellence and Technological Enterprise (N.A.)
This publication has 40 references indexed in Scilit:
- Experimental study of a pneumatic engine with heat supply to improve the overall performanceApplied Thermal Engineering, 2018
- Gasoline hybrid pneumatic engine for efficient vehicle powertrain hybridizationApplied Energy, 2015
- Research on a pneumatic hybrid engine with regenerative braking and compressed-air-assisted crankingProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2015
- A real-time model of an automotive air propulsion systemApplied Energy, 2014
- The Applications of Piston Type Compressed Air Engines on Motor VehiclesProcedia Engineering, 2014
- Backstepping sliding mode tracking control of a vane-type air motor table motion systemISA Transactions, 2011
- Design and implementation of an air-powered motorcyclesApplied Energy, 2009
- Energy-saving hybrid vehicle using a pneumatic-power systemApplied Energy, 2005
- Development of a hybrid pneumatic-power vehicleApplied Energy, 2005
- Low-pressure air motor for wall-climbing robot actuationMechatronics, 2003