Effects of Mechanical Compression on the Aging and the Expansion Behavior of Si/C-Composite|NMC811 in Different Lithium-Ion Battery Cell Formats
Open Access
- 14 November 2019
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 166 (15) , A3796-A3805
Abstract
Due to their extreme volume expansion, Si/C-composites suffer from fracture or delamination and consequent capacity fading during the Li-ion cell operation. One approach to reduce the electrical contact loss and improve the performance is the application of mechanical pressure on the cell. Therefore, a comprehensive aging study of Si/C|NMC811 pouch cells is conducted with cells in different compression configurations as uncompressed and under flexible and fixed compression at pressure levels in the range of 0.08 MPa, 0.42 MPa, and 0.84 MPa. In-situ swelling measurements by dilation as well as in-operando mapping of the pressure distribution on the cell surfaces reveal the positive influence of the low pressure fixed and the middle pressure flexible compression on the cycle life. For the heavily fixed compressed cells, an inhomogeneous pressure distribution and occurring pressure hot -spots close to the cell current collectors of up to 5.2 MPa are found. An extensive post-mortem analysis including SEM cross-sectioning and EIS measurements of the aged anodes and the separator confirms cell failure by different aging mechanisms depending on the type of compression. Aging experiments of Si/C|NMC811 cylindrical 18650-cells show local differences along the jelly roll which are explained by the help of the pouch cell results.Keywords
Funding Information
- Bundesministerium für Wirtschaft und Energie (03ET6081A)
This publication has 37 references indexed in Scilit:
- Operando Pressure Measurements Reveal Solid Electrolyte Interphase Growth to Rank Li-Ion Cell PerformanceJoule, 2019
- Review—Nano-Silicon/Carbon Composite Anode Materials Towards Practical Application for Next Generation Li-Ion BatteriesJournal of the Electrochemical Society, 2015
- Capacity Fading Mechanisms of Silicon Nanoparticle Negative Electrodes for Lithium Ion BatteriesJournal of the Electrochemical Society, 2015
- Suppressing Vertical Displacement of Lithiated Silicon Particles in High Volumetric Capacity Battery ElectrodesChemElectroChem, 2015
- Visualization and Quantification of Electrochemical and Mechanical Degradation in Li Ion BatteriesScience, 2013
- Electrochemical performances and volume variation of nano-textured silicon thin films as anodes for lithium-ion batteriesNanotechnology, 2013
- 25th Anniversary Article: Understanding the Lithiation of Silicon and Other Alloying Anodes for Lithium‐Ion BatteriesAdvanced Materials, 2013
- A review of the electrochemical performance of alloy anodes for lithium-ion batteriesJournal of Power Sources, 2011
- Reaction of Li with Alloy Thin Films Studied by In Situ AFMJournal of the Electrochemical Society, 2003
- All‐Solid Lithium Electrodes with Mixed‐Conductor MatrixJournal of the Electrochemical Society, 1981