Study on Dry Sliding Wear and Friction Behaviour of Al7068/Si3N4/BN Hybrid Composites
Open Access
Abstract
Hybrid aluminium metal matrix composites have the potential to replace single reinforced aluminium metal matrix composites due to improved properties. Moreover, tribological performance is critical for these composites, as they have extensive application areas, such as the automotive, aerospace, marine and defence industries. The present work aims to establish the tribological characteristics of Al7068/Si3N4/BN hybrid metal matrix composites prepared by stir casting route and studied using a pin-on-disc apparatus under dry sliding conditions. The hybrid composite samples were prepared at various weight percentages (0, 5, 10) of Si3N4 and BN particles. To investigate the tribological performance of the prepared composites, the wear experiments were conducted by varying the load (20, 40 and 60 N), sliding velocity (1.5, 2.5 and 3.5 m/s) and sliding distance (500, 1000 and 1500 m). Wear experimental runs were carried out based on the plan of experiments proposed by Taguchi. The minimum wear rate was found with the composite material reinforced with 10 wt. % of Si3N4 and 5 wt. % of BN. Analysis of Variance (ANOVA) was employed to analyse the effect of process parameters on wear rate and coefficient of friction (COF). The ANOVA test revealed that the weight fraction of Si3N4 has more of a contribution percentage (36.60%) on wear rate, and load has more of a contribution percentage (29.73%) on COF. The worn-out surface of the wear test specimens was studied using its corresponding SEM micrograph and correlated with the dry sliding wear experiment results.Keywords
This publication has 42 references indexed in Scilit:
- Tribological behaviour of powder metallurgy-processed aluminium hybrid composites with the addition of graphite solid lubricantCeramics International, 2013
- Microstructure and mechanical properties of Al–Al2O3 micro and nano composites fabricated by stir castingMaterials Science and Engineering: A, 2011
- Wear characteristics of hybrid aluminium matrix composites reinforced with graphite and silicon carbide particulatesComposites Science and Technology, 2010
- Effect of Experimental Parameters on Reciprocating Wear Behavior of Al-Si-SiCp Composites under Dry ConditionTribology Online, 2009
- Effect of mechanical alloying process on mechanical properties of α-Si3N4 reinforced aluminum-based composite materialsMaterials & Design (1980-2015), 2008
- Thermomechanical Analysis of Elastoplastic Bodies in a Sliding Spherical Contact and the Effects of Sliding Speed, Heat Partition, and Thermal SofteningJournal of Tribology, 2008
- Asperity contact theories: Do they predict linearity between contact area and load?Journal of the Mechanics and Physics of Solids, 2008
- Effects of tribooxidation on sliding behavior of aluminumWear, 2005
- Mechanical characterisation of AA7015 aluminium alloy reinforced with ceramicsJournal of Materials Processing Technology, 2003
- Silicon Nitride and Related MaterialsJournal of the American Ceramic Society, 2000