Research on the performance of three-dimensional-braided-glass fiber reinforced in-situ polymerized TPU
Authors:
- 30 April 2024
- journal article
- research article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 38 (2) , 435-450
Abstract
In this study, thermoplastic polyurethane (TPU) is prepared by using 4,4′-methylenediphenyl diisocyanate (4,4′-MDI), poly (1,4-butylene adipate) (PBA), and butane-1,4-diol (BDO). PBA as soft segment for TPU. 4,4′- MDI and BDO as hard segment for TPU. The effects of isocyanate index, hard segment content, and soft segment molecular weight on TPU micro-phase separation, molecular weight, and thermal performance are investigated. 3D-Braided-Glass Fiber (GF) reinforced TPU composites are prepared by in-situ polymerized TPU as the matrix resin. Investigation is conducted into how the mechanical properties and microstructure of the composites are affected by the matrix resin TPU’s structural parameters. As the isocyanate index increases, the mechanical properties of the composites first enhance and then weaken, and the interface bonding between TPU and GF gradually deteriorates. Increasing the molecular weight of soft segments has the same trend of change. With the increase of hard segment content, the mechanical properties of the composites are enhanced. The results demonstrate that the mechanical properties of the TPU/GF composites are at their best when the isocyanate index is 1.01, the hard segment content is 43%, and the PBA molecular weight is 2000, with the stretching strength being 289.6 MPa, the impact strength being 141.8 KJ/mm2, the bending strength being 183.2 MPa, and the flexural modulus being 10.7 GPa.Keywords
Funding Information
- Quzhou Science and Technology Bureau (2023K211)
- Zhejiang Provincial Natural Science Foundation Project (LTGS23E030001)
This publication has 21 references indexed in Scilit:
- A parametric flow visualisation study on the impregnation and consolidation stages of the Wet Compression Moulding process. Part I: Process parametersComposites Part A: Applied Science and Manufacturing, 2021
- Strong and Flexible Carbon Fiber Fabric Reinforced Thermoplastic Polyurethane Composites for High‐Performance EMI Shielding ApplicationsMacromolecular Materials and Engineering, 2020
- Study on effect of process parameters on tensile properties of compression molded natural fiber reinforced polymer compositesSN Applied Sciences, 2020
- Formulation of micro‐phase separation kinetics of polyurethane nanocompositesPolymers for Advanced Technologies, 2018
- Thermoplastic polyurethane/glass fabric composite laminates: Low velocity impact behavior under extreme temperature conditionsComposite Structures, 2017
- Manufacturing and characterization of polyurethane based sandwich composite structuresComposite Structures, 2015
- Thermoplastic polyurethanes from renewable resources: effect of soft segment chemical structure and molecular weight on morphology and final propertiesPolymer International, 2012
- Microstructural characterizations and mechanical behavior of polyurethane elastomers strengthened with milled fiberglassJournal of Materials Processing Technology, 2007
- Development of polyurethane elastomer composite materials by addition of milled fiberglass with coupling agentMaterials Letters, 2007
- Thermal and mechanical properties of glass reinforced soy-based polyurethane compositesComposites Science and Technology, 2005