Application of Renewable Energies: Effects of Oxyhydrogen Negative Pressure Indraft on Combustion and Emission of Biobutanol/Gasoline Combined Supply Engine Under Exhaust Gas Recirculation Coupled Lean–Burn
Open Access
Abstract
Combining biobutanol and oxyhydrogen in an SI engine can reduce fossil-fuel use and improve power, but oxyhydrogen increases NOx. Without sacrificing combustion stability, this work investigates lean–burn coupled with exhaust gas recirculation for a gasoline port injection + biobutanol direct injection + oxyhydrogen in-cylinder negative pressure indraft engine, across five oxyhydrogen flow levels, four exhaust gas recirculation ratios, and three excess air ratios. Results show that with lean–burn + exhaust gas recirculation, oxyhydrogen more effectively lowers the coefficient of variation of indicated mean effective pressure and increases indicated mean effective pressure, peak cylinder pressure, and peak heat release rate. With 16 L/min oxyhydrogen, the negative effects of 6–12% exhaust gas recirculation on CA 0–10 and CA 10–90 are mitigated for all excess air ratios, and the crank angle corresponding to peak pressure remains optimal under lean conditions when 6% ≤ exhaust gas recirculation ≤ 12%. Oxyhydrogen reduces CO and HC after exhaust gas recirculation, while lean–burn dominates CO reduction. Exhaust gas recirculation suppresses NO more than lean–burn. At 1.1 ≤ excess air ratios ≤ 1.2, the optimal exhaust gas recirculation is 12%, ensuring favorable in-cylinder conditions. Overall, lean–burn + exhaust gas recirculation effectively controls NO and maximizes thermal efficiency and renewable-fuel substitution. The optimal strategy is “oxyhydrogen = 16 L/min, exhaust gas recirculation = 12%, 1.1 ≤ excess air ratios ≤ 1.2”.Keywords
Funding Information
- Jilin Provincial Scientific and Technological Development Program (20240101140JC)
- National Natural Science Foundation of China (52506138)
- Yangtze River Delta Science and Technology Innovation Community Joint Research Plan (2025ZY03010)
- National Undergraduate Training Program on Innovation and Entrepreneurship (202510183143)
This publication has 51 references indexed in Scilit:
- A comprehensive performance evaluation of a fuel-cell hybrid electric heavy-duty truck through energy flow experiment under user-defined driving test cyclesCase Studies in Thermal Engineering, 2026
- Improving the lean performance of an n-butanol rotary engine by hydrogen enrichmentEnergy Conversion and Management, 2018
- Performance of hybrid compression ignition engine using hydroxy (HHO) from dry cellEnergy Conversion and Management, 2018
- Combustion characteristics of a gasoline engine with independent intake port injection and direct injection systems for n-butanol and gasolineEnergy Conversion and Management, 2016
- Impact of higher n-butanol addition on combustion and performance of GDI engine in stoichiometric combustionEnergy Conversion and Management, 2015
- Performance and emissions of a diesel engine fueled by biodiesel–diesel, biodiesel–diesel-additive and kerosene–biodiesel blendsEnergy Conversion and Management, 2014
- Combined effects of cooled EGR and a higher geometric compression ratio on thermal efficiency improvement of a downsized boosted spark-ignition direct-injection engineEnergy Conversion and Management, 2014
- Experimental study on SI engine fuelled with butanol–gasoline blend and H2O additionEnergy Conversion and Management, 2013
- Combustion and emissions performance of a hydrogen engine at idle and lean conditionsInternational Journal of Energy Research, 2013
- EXPERIMENTAL INVESTIGATION ON VARYING THE COMPRESSION RATIO OF SI ENGINE WORKING UNDER DIFFERENT ETHANOL-GASOLINE FUEL BLENDSInternational Journal of Energy Research, 1997