Beiping Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Beiping Jiang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Dingchao Qian
China FAW Co., Ltd. R&D Center, Changchun 130025, China
1 shared publicationFangxi Xie
National Key Laboratory of Automotive Chassis Integration and Bionics, Jilin University, Changchun 130025, China
1 shared publication- Fangxi Xie
College of Automotive Engineering, Jilin University, Changchun 130025, China
1 shared publication Hangshi Qu
China FAW Co., Ltd. R&D Center, Changchun 130025, China
1 shared publicationHao Gong
National Key Laboratory of Automotive Chassis Integration and Bionics, Jilin University, Changchun 130025, China
1 shared publication- Hengfu Guo
College of Automotive Engineering, Jilin University, Changchun 130022, China
1 shared publication
Latest Publications
- Open Access
- 11 May 2026
- Published by Scilight Press Pty Ltd in International Journal of Automotive Manufacturing and Materials
- Vol. 5 (2)
Study on the Effect of Diluted Gas on the Lean Combustion Performance of Methanol-Diluted Gas Engines
Based on a three-dimensional simulation platform, this study investigated the effects of N2, CO2, and O2 as dilution gases on the combustion and emission performance of methanol engines under constant total fuel quantity, dilution ratio of 10%/20%, and blending ratio of 0%/10%/20% conditions. In terms of combustion performance, diluting the syngas can shorten the ignition delay period and combustion duration, advance the combustion center, increase the peak cylinder pressure and temperature, and the effect is most significant when CO2 is diluted (for example, in the 20% dilution ratio CO2 condition, the 20% blending ratio is 3.5 °CA shorter than 0%); the ignition delay period and combustion duration become longer, the cylinder pressure decreases under CO2 conditions, and slightly increases under N2 and O2 conditions. In terms of emission performance, NOX emissions are CO2 < N2 < O2 (at a 10% dilution ratio and 10% blending ratio, CO2 relative to O2 reduces NOX by 98.5%); under O2 conditions, syngas blending reduces CO emissions, while under N2 and CO2 conditions, it increases, and under CO2 with a 20% dilution ratio, CO sharply increases; syngas blending reduces the emissions of HC, CH3OH, and CH2O, and under O2 dilution, the CO emissions are the lowest, and they increase as the dilution ratio increases. In summary, N2 dilution is beneficial for the coordinated optimization of combustion and NOX emissions.
- 11 May 2026
- Published by Scilight Press Pty Ltd in International Journal of Automotive Manufacturing and Materials
- Vol. 5 (2)
Open AccessStudy on the Effect of Diluted Gas on the Lean Combustion Performance of Methanol-Diluted Gas Engines
Based on a three-dimensional simulation platform, this study investigated the effects of N2, CO2, and O2 as dilution gases on the combustion and emission performance of methanol engines under constant total fuel quantity, dilution ratio of 10%/20%, and blending ratio of 0%/10%/20% conditions. In terms of combustion performance, diluting the syngas can shorten the ignition delay period and combustion duration, advance the combustion center, increase the peak cylinder pressure and temperature, and the effect is most significant when CO2 is diluted (for example, in the 20% dilution ratio CO2 condition, the 20% blending ratio is 3.5 °CA shorter than 0%); the ignition delay period and combustion duration become longer, the cylinder pressure decreases under CO2 conditions, and slightly increases under N2 and O2 conditions. In terms of emission performance, NOX emissions are CO2 < N2 < O2 (at a 10% dilution ratio and 10% blending ratio, CO2 relative to O2 reduces NOX by 98.5%); under O2 conditions, syngas blending reduces CO emissions, while under N2 and CO2 conditions, it increases, and under CO2 with a 20% dilution ratio, CO sharply increases; syngas blending reduces the emissions of HC, CH3OH, and CH2O, and under O2 dilution, the CO emissions are the lowest, and they increase as the dilution ratio increases. In summary, N2 dilution is beneficial for the coordinated optimization of combustion and NOX emissions.
- Open Access
Application of Renewable Energies: Effects of Oxyhydrogen Negative Pressure Indraft on Combustion and Emission of Biobutanol/Gasoline Combined Supply Engine Under Exhaust Gas Recirculation Coupled Lean–Burn
Combining biobutanol and oxyhydrogen in an SI engine can reduce fossil-fuel use and improve power, but oxyhydrogen increases NOx. Without sacrificing combustion stability, this work investigates lean–burn coupled with exhaust gas recirculation for a gasoline port injection + biobutanol direct injection + oxyhydrogen in-cylinder negative pressure indraft engine, across five oxyhydrogen flow levels, four exhaust gas recirculation ratios, and three excess air ratios. Results show that with lean–burn + exhaust gas recirculation, oxyhydrogen more effectively lowers the coefficient of variation of indicated mean effective pressure and increases indicated mean effective pressure, peak cylinder pressure, and peak heat release rate. With 16 L/min oxyhydrogen, the negative effects of 6–12% exhaust gas recirculation on CA 0–10 and CA 10–90 are mitigated for all excess air ratios, and the crank angle corresponding to peak pressure remains optimal under lean conditions when 6% ≤ exhaust gas recirculation ≤ 12%. Oxyhydrogen reduces CO and HC after exhaust gas recirculation, while lean–burn dominates CO reduction. Exhaust gas recirculation suppresses NO more than lean–burn. At 1.1 ≤ excess air ratios ≤ 1.2, the optimal exhaust gas recirculation is 12%, ensuring favorable in-cylinder conditions. Overall, lean–burn + exhaust gas recirculation effectively controls NO and maximizes thermal efficiency and renewable-fuel substitution. The optimal strategy is “oxyhydrogen = 16 L/min, exhaust gas recirculation = 12%, 1.1 ≤ excess air ratios ≤ 1.2”.
Open AccessApplication of Renewable Energies: Effects of Oxyhydrogen Negative Pressure Indraft on Combustion and Emission of Biobutanol/Gasoline Combined Supply Engine Under Exhaust Gas Recirculation Coupled Lean–Burn
Combining biobutanol and oxyhydrogen in an SI engine can reduce fossil-fuel use and improve power, but oxyhydrogen increases NOx. Without sacrificing combustion stability, this work investigates lean–burn coupled with exhaust gas recirculation for a gasoline port injection + biobutanol direct injection + oxyhydrogen in-cylinder negative pressure indraft engine, across five oxyhydrogen flow levels, four exhaust gas recirculation ratios, and three excess air ratios. Results show that with lean–burn + exhaust gas recirculation, oxyhydrogen more effectively lowers the coefficient of variation of indicated mean effective pressure and increases indicated mean effective pressure, peak cylinder pressure, and peak heat release rate. With 16 L/min oxyhydrogen, the negative effects of 6–12% exhaust gas recirculation on CA 0–10 and CA 10–90 are mitigated for all excess air ratios, and the crank angle corresponding to peak pressure remains optimal under lean conditions when 6% ≤ exhaust gas recirculation ≤ 12%. Oxyhydrogen reduces CO and HC after exhaust gas recirculation, while lean–burn dominates CO reduction. Exhaust gas recirculation suppresses NO more than lean–burn. At 1.1 ≤ excess air ratios ≤ 1.2, the optimal exhaust gas recirculation is 12%, ensuring favorable in-cylinder conditions. Overall, lean–burn + exhaust gas recirculation effectively controls NO and maximizes thermal efficiency and renewable-fuel substitution. The optimal strategy is “oxyhydrogen = 16 L/min, exhaust gas recirculation = 12%, 1.1 ≤ excess air ratios ≤ 1.2”.