On the necessity of blind phase search for longitudinal power profile estimation
Authors:
- Yuhua ChenYCYuhua Chen
- Junjiang XiangJXJunjiang Xiang
- Chao LiCLChao Li
- Gai ZhouGZGai Zhou
- Meng XiangMXMeng Xiang
- Songnian FuSFSongnian Fu
- Yuwen QinYQYuwen Qin
- 17 November 2026
- journal article
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (23) , 6467
Abstract
Longitudinal power profile estimation (PPE) has the potential to monitor the stable operation of long-haul optical fiber links, but its accuracy is limited by the blind phase search (BPS) block size (BS) of 64 typically used in current optical transceivers. We examine the impact and necessity of receiver-side BPS on the accuracy of longitudinal PPE when 120 Gbaud dual-polarization quadrature phase shift keying (DP-QPSK) signals are transmitted over 3 × 50 km G.654.E fiber. Simulation results show that removing BPS in the PPE-oriented digital signal processing (DSP) generally provides a root-mean-square error (RMSE) gain over the standard BPS BS of 64, and this gain can be maintained at wider linewidths as the launch optical power (LOP) increases. Experimental results under three linewidths of 3 Hz, 100 kHz, and 200 kHz provide representative narrow and wider linewidth validations, showing that, in comparison with PPE with a typical BPS BS, removing BPS achieves comparable RMSE at a linewidth of 100 kHz over the LOP range of 8~16 dBm. Specifically, at the LOP of 14 dBm and a linewidth of 3 Hz, removing BPS achieves a 0.36 dB accuracy improvement over PPE with a typical BPS, while introducing a 0.3 dB Q-factor penalty. Those results indicate that receiver-side BPS is not universally necessary for longitudinal PPE. Alternatively, removing BPS can be beneficial under suitable linewidths and LOPs, while maintaining acceptable communication performance.Keywords
Funding Information
- National Natural Science Foundation of China (62435004)
- Guangdong Introducing Innovative and Entrepreneurial Teams of “The Pearl River Talent Recruitment Program” (2021ZT09X044)
This publication has 11 references indexed in Scilit:
- Modeling and Mitigation of Power Degradation Induced by Hard Decision Errors in Power Profile EstimationJournal of Lightwave Technology, 2026
- On the Nonlinear Shaping Gain With Probabilistic Shaping and Carrier Phase RecoveryJournal of Lightwave Technology, 2023
- Performance Limit of Fiber-Longitudinal Power Profile Estimation MethodsJournal of Lightwave Technology, 2023
- 0.77-dB Anomaly Loss Localization Based on DSP-Based Fiber-Longitudinal Power Estimation Using Linear Least Squares2023
- Machine Learning-Enabled Intelligent Fiber-Optic Communications: Major Obstacles and the Way ForwardIEEE Communications Magazine, 2022
- Precise Longitudinal Power Monitoring over 2,080 km Enabled by Step Size Selection of Split Step Fourier Method2022
- Power Profile Estimation of Optical Transmission Links Based on Machine LearningIEEE Photonics Technology Letters, 2021
- Cycle-Slip Rate Analysis of Blind Phase Search DSP Circuit Implementations2020
- Simultaneous Detection of Anomaly Points and Fiber types in Multi-span Transmission Links Only by Receiver-side Digital Signal Processing2020
- Alternatives to the Median Absolute DeviationJournal of the American Statistical Association, 1993