Chao Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chao Li has a total of 242 co-authors. Here are the top co-authors by number of shared publications:
- Zhixue He
Peng Cheng Laboratory (PCL), Shenzhen, China
23 shared publications - Zichen Liu
Pengcheng Laboratoryhttps://ror.org/03qdqbt06, Shenzhen 518055, China
17 shared publications - Xu Zhang
Peng Cheng Laboratory, Shenzhen, China
14 shared publications Zhixue He
Pengcheng Laboratory
12 shared publicationsShaohua Yu
Pengcheng Laboratoryhttps://ror.org/03qdqbt06, Shenzhen 518055, China
11 shared publications- Qibing Wang
Peng Cheng Laboratory, Shenzhen, China
10 shared publications
Latest Publications
- 17 November 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (23) , 6467
On the necessity of blind phase search for longitudinal power profile estimation
Longitudinal power profile estimation (PPE) has the potential to monitor the stable operation of long-haul optical fiber links, but its accuracy is limited by the blind phase search (BPS) block size (BS) of 64 typically used in current optical transceivers. We examine the impact and necessity of receiver-side BPS on the accuracy of longitudinal PPE when 120 Gbaud dual-polarization quadrature phase shift keying (DP-QPSK) signals are transmitted over 3 × 50 km G.654.E fiber. Simulation results show that removing BPS in the PPE-oriented digital signal processing (DSP) generally provides a root-mean-square error (RMSE) gain over the standard BPS BS of 64, and this gain can be maintained at wider linewidths as the launch optical power (LOP) increases. Experimental results under three linewidths of 3 Hz, 100 kHz, and 200 kHz provide representative narrow and wider linewidth validations, showing that, in comparison with PPE with a typical BPS BS, removing BPS achieves comparable RMSE at a linewidth of 100 kHz over the LOP range of 8~16 dBm. Specifically, at the LOP of 14 dBm and a linewidth of 3 Hz, removing BPS achieves a 0.36 dB accuracy improvement over PPE with a typical BPS, while introducing a 0.3 dB Q-factor penalty. Those results indicate that receiver-side BPS is not universally necessary for longitudinal PPE. Alternatively, removing BPS can be beneficial under suitable linewidths and LOPs, while maintaining acceptable communication performance.
- 17 November 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (23) , 6467
On the necessity of blind phase search for longitudinal power profile estimation
Longitudinal power profile estimation (PPE) has the potential to monitor the stable operation of long-haul optical fiber links, but its accuracy is limited by the blind phase search (BPS) block size (BS) of 64 typically used in current optical transceivers. We examine the impact and necessity of receiver-side BPS on the accuracy of longitudinal PPE when 120 Gbaud dual-polarization quadrature phase shift keying (DP-QPSK) signals are transmitted over 3 × 50 km G.654.E fiber. Simulation results show that removing BPS in the PPE-oriented digital signal processing (DSP) generally provides a root-mean-square error (RMSE) gain over the standard BPS BS of 64, and this gain can be maintained at wider linewidths as the launch optical power (LOP) increases. Experimental results under three linewidths of 3 Hz, 100 kHz, and 200 kHz provide representative narrow and wider linewidth validations, showing that, in comparison with PPE with a typical BPS BS, removing BPS achieves comparable RMSE at a linewidth of 100 kHz over the LOP range of 8~16 dBm. Specifically, at the LOP of 14 dBm and a linewidth of 3 Hz, removing BPS achieves a 0.36 dB accuracy improvement over PPE with a typical BPS, while introducing a 0.3 dB Q-factor penalty. Those results indicate that receiver-side BPS is not universally necessary for longitudinal PPE. Alternatively, removing BPS can be beneficial under suitable linewidths and LOPs, while maintaining acceptable communication performance.
- 8 September 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (18) , 5109-5112
Full C-band transmission at >50-Tb/s GMI rate over 557.6-km anti-resonant hollow-core fiber
Anti-resonant hollow-core fiber (AR-HCF) has emerged as a promising transmission medium for long-reach high-capacity optical fiber communications owing to its unique properties of low transmission loss, low nonlinearity, and low latency. In this Letter, we experimentally demonstrate a fully loaded C-band transmission with a generalized mutual information-estimated capacity of 50.14 Tb/s over a total fiber distance of 557.6 km based on a 21.9-km low-loss self-developed AR-HCF. The transmission is realized using a 32.8-km recirculating loop loaded with 120 wavelength channels on 50-GHz grids. To extend the loop length and improve system performance for convenient lab demonstration, we propose a recirculating loop architecture that leverages the intrinsically low Rayleigh backscattering of AR-HCF. To the best of our knowledge, this represents the highest reported C-band transmission capacity for HCF links exceeding 100 km.
- 8 September 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (18) , 5109-5112
Full C-band transmission at >50-Tb/s GMI rate over 557.6-km anti-resonant hollow-core fiber
Anti-resonant hollow-core fiber (AR-HCF) has emerged as a promising transmission medium for long-reach high-capacity optical fiber communications owing to its unique properties of low transmission loss, low nonlinearity, and low latency. In this Letter, we experimentally demonstrate a fully loaded C-band transmission with a generalized mutual information-estimated capacity of 50.14 Tb/s over a total fiber distance of 557.6 km based on a 21.9-km low-loss self-developed AR-HCF. The transmission is realized using a 32.8-km recirculating loop loaded with 120 wavelength channels on 50-GHz grids. To extend the loop length and improve system performance for convenient lab demonstration, we propose a recirculating loop architecture that leverages the intrinsically low Rayleigh backscattering of AR-HCF. To the best of our knowledge, this represents the highest reported C-band transmission capacity for HCF links exceeding 100 km.
- 7 August 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (16) , 30627
Enhanced focal intensity and reduced divergence of Airy ring beams via joint launch angle and self-acceleration modulation
To overcome the trade-off between the focusing capability and post-focal divergence of abruptly autofocusing beams, we propose a joint launch angle and self-acceleration (LA-SA) modulation technique. For circular Airy beams, the joint LA-SA modulation amplifies the intensity at an extended post-focal plane by approximately 11×, accompanied by a 4× focal enhancement. For non-circular Airy ring beams, introducing an azimuth-dependent compensation phase achieves constructive interference, enabling the phase-compensated LA modulation to amplify the focal peak intensity by nearly 2× over LA modulation alone. Building upon this, the complete phase-compensated joint LA-SA modulation is divided into the set-SA and set-LA methods, which fix a uniform SA or LA factor to determine the azimuth-dependent LA or SA function, respectively. By reducing angular dispersion, the set-LA method delivers a superior 10× post-focal intensity enhancement. Fundamentally, this technique provides what we believe to be a new strategy for beam manipulation and may broaden the range of potential applications for Airy ring beams.
- 7 August 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (16) , 30627
Enhanced focal intensity and reduced divergence of Airy ring beams via joint launch angle and self-acceleration modulation
To overcome the trade-off between the focusing capability and post-focal divergence of abruptly autofocusing beams, we propose a joint launch angle and self-acceleration (LA-SA) modulation technique. For circular Airy beams, the joint LA-SA modulation amplifies the intensity at an extended post-focal plane by approximately 11×, accompanied by a 4× focal enhancement. For non-circular Airy ring beams, introducing an azimuth-dependent compensation phase achieves constructive interference, enabling the phase-compensated LA modulation to amplify the focal peak intensity by nearly 2× over LA modulation alone. Building upon this, the complete phase-compensated joint LA-SA modulation is divided into the set-SA and set-LA methods, which fix a uniform SA or LA factor to determine the azimuth-dependent LA or SA function, respectively. By reducing angular dispersion, the set-LA method delivers a superior 10× post-focal intensity enhancement. Fundamentally, this technique provides what we believe to be a new strategy for beam manipulation and may broaden the range of potential applications for Airy ring beams.
- 4 August 2026
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18 (9) , 885
Submarine integrated sensing and communication cable networks enable high-precision earthquake location estimation through linear wavefront theory: publisher’s note
This publisher’s note contains a correction to J. Opt. Commun. Netw. 18 , B108 ( 2026 ) 10.1364/JOCN.585552 .
- 4 August 2026
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18 (9) , 885
Submarine integrated sensing and communication cable networks enable high-precision earthquake location estimation through linear wavefront theory: publisher’s note
This publisher’s note contains a correction to J. Opt. Commun. Netw. 18 , B108 ( 2026 ) 10.1364/JOCN.585552 .
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 936-939
C-Band 4λ 960-Gb/s PAM4 Transmission Over AR-HCF Enabled by Multi-Task Learning
A neural network equalizer based on multi-task learning is proposed, which achieves resource efficiency through shared network parameters while enhancing system performance by leveraging inter-wavelength channel correlations. The scheme includes a signal preprocessing unit and a main multi-task learning (MTL) network to achieve architectural decoupling between linear compensation and nonlinear feature learning. A C-band 960 Gb/s (240 Gb/s/λ × 4λ) PAM4 WDM IM/DD transmission system was experimentally constructed using four independent lasers over 1.4 km anti-resonant hollow-core fiber (AR-HCF). Experimental results demonstrate the proposed MTL equalizer consistently outperforms single-task equalizers across the tested channels while reducing parameter count by approximately 57%, significantly improving both equalization performance and computational efficiency.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 936-939
C-Band 4λ 960-Gb/s PAM4 Transmission Over AR-HCF Enabled by Multi-Task Learning
A neural network equalizer based on multi-task learning is proposed, which achieves resource efficiency through shared network parameters while enhancing system performance by leveraging inter-wavelength channel correlations. The scheme includes a signal preprocessing unit and a main multi-task learning (MTL) network to achieve architectural decoupling between linear compensation and nonlinear feature learning. A C-band 960 Gb/s (240 Gb/s/λ × 4λ) PAM4 WDM IM/DD transmission system was experimentally constructed using four independent lasers over 1.4 km anti-resonant hollow-core fiber (AR-HCF). Experimental results demonstrate the proposed MTL equalizer consistently outperforms single-task equalizers across the tested channels while reducing parameter count by approximately 57%, significantly improving both equalization performance and computational efficiency.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 920-923
O-, S-, C-, and L-Band 4λ 960-Gb/s PAM8 Transmission Over 6.2-km AR-HCF With Linear FFE Only
Anti-resonant hollow-core fiber (AR-HCF) has exhibited the revolutionary potential in wide-spectrum optical transmission. We propose and demonstrate the co-transmission of O, S, C, L-band signals in a single AR-HCF. Enabled by 80Gbaud PAM8 modulated four independent tunable lasers in O, S, C, L-bands and linear equalizers, we achieve the 960Gb/s (240Gb/s/λ × 4 λ) optical interconnect over 6.2km AR-HCF at 20% FEC limit of 2.4 × 10-2. By adjusting the laser wavelengths, the measured useful bandwidths within the 20% FEC limit are 35nm, 35nm, 30nm and 20nm in O, S, C, L-bands, respectively, which provides an upgrade solution to achieve high-capacity optical interconnects with 200Gb/s/λ and beyond.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 920-923
O-, S-, C-, and L-Band 4λ 960-Gb/s PAM8 Transmission Over 6.2-km AR-HCF With Linear FFE Only
Anti-resonant hollow-core fiber (AR-HCF) has exhibited the revolutionary potential in wide-spectrum optical transmission. We propose and demonstrate the co-transmission of O, S, C, L-band signals in a single AR-HCF. Enabled by 80Gbaud PAM8 modulated four independent tunable lasers in O, S, C, L-bands and linear equalizers, we achieve the 960Gb/s (240Gb/s/λ × 4 λ) optical interconnect over 6.2km AR-HCF at 20% FEC limit of 2.4 × 10-2. By adjusting the laser wavelengths, the measured useful bandwidths within the 20% FEC limit are 35nm, 35nm, 30nm and 20nm in O, S, C, L-bands, respectively, which provides an upgrade solution to achieve high-capacity optical interconnects with 200Gb/s/λ and beyond.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 912-915
Performance Enhancement for 4.2-km Multi-Mode Transmission by Dual-Input Neural Network Diversity
For short-distance applications, Multi-mode fiber (MMF)-based optical communication systems have become an important solution due to their low cost and compatibility with existing infrastructure. However, the performance of MMF systems is significantly limited by mode-dependent loss (MDL) and mode dispersion (MD), especially in high-speed transmission scenarios. Diversity reception technology serves as an effective solution to significantly improve overall system performance by combining multiple signal paths. Our work demonstrates a neural network (NN)-enhanced diversity reception scheme that fundamentally addresses the limitations of conventional methods—selection combining (SC), equal gain combining (EGC), and maximal ratio combining (MRC) — in MMF systems. The experimental results for both 30-GBaud PAM-4 and 20-GBaud PAM-8 signal MMF transmissions demonstrate that the performance can be significantly improved by the proposed scheme and NN methods. Both 30-GBaud PAM-4 and 20-GBaud PAM-8 signal transmissions over 4.2-km MMF have been successfully achieved under 7% and 20% forward error correction (FEC) thresholds, respectively. It indicates that NN-based diversity reception can effectively mitigate MDL and MD in multi-mode transmission and improve system robustness and reliability to meet future communication requirements.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 912-915
Performance Enhancement for 4.2-km Multi-Mode Transmission by Dual-Input Neural Network Diversity
For short-distance applications, Multi-mode fiber (MMF)-based optical communication systems have become an important solution due to their low cost and compatibility with existing infrastructure. However, the performance of MMF systems is significantly limited by mode-dependent loss (MDL) and mode dispersion (MD), especially in high-speed transmission scenarios. Diversity reception technology serves as an effective solution to significantly improve overall system performance by combining multiple signal paths. Our work demonstrates a neural network (NN)-enhanced diversity reception scheme that fundamentally addresses the limitations of conventional methods—selection combining (SC), equal gain combining (EGC), and maximal ratio combining (MRC) — in MMF systems. The experimental results for both 30-GBaud PAM-4 and 20-GBaud PAM-8 signal MMF transmissions demonstrate that the performance can be significantly improved by the proposed scheme and NN methods. Both 30-GBaud PAM-4 and 20-GBaud PAM-8 signal transmissions over 4.2-km MMF have been successfully achieved under 7% and 20% forward error correction (FEC) thresholds, respectively. It indicates that NN-based diversity reception can effectively mitigate MDL and MD in multi-mode transmission and improve system robustness and reliability to meet future communication requirements.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 892-895
20.8 Tbit/s C+L-Band DWDM IM/DD Transmission Over Nested Anti-Resonant Nodeless Fiber Link
We experimentally demonstrate, for the first time, a 20.8 Tbit/s intensity modulation/direct detection (IM/DD) optical interconnect supported by the dense wavelength division multiplexing (DWDM) technique over 1.4 km low chromatic dispersion nested anti-resonant nodeless fiber (NANF). Covering 9.6 THz in C+L-band, 96 wavelength channels are used to carry 80 GBaud probabilistic constellation shaping (PCS) pulse amplitude modulation (PAM) 8, thereby achieving a rate of > 200 Gbit/s/λ. The measured results indicate the presence of a significant potential for C+L-Band DWDM IM/DD transmission over NANF link to intra-data-center interconnects (intra-DCIs).
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (13) , 892-895
20.8 Tbit/s C+L-Band DWDM IM/DD Transmission Over Nested Anti-Resonant Nodeless Fiber Link
We experimentally demonstrate, for the first time, a 20.8 Tbit/s intensity modulation/direct detection (IM/DD) optical interconnect supported by the dense wavelength division multiplexing (DWDM) technique over 1.4 km low chromatic dispersion nested anti-resonant nodeless fiber (NANF). Covering 9.6 THz in C+L-band, 96 wavelength channels are used to carry 80 GBaud probabilistic constellation shaping (PCS) pulse amplitude modulation (PAM) 8, thereby achieving a rate of > 200 Gbit/s/λ. The measured results indicate the presence of a significant potential for C+L-Band DWDM IM/DD transmission over NANF link to intra-data-center interconnects (intra-DCIs).
- 26 March 2026
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18 (4) , B108
Submarine integrated sensing and communication cable networks enable high-precision earthquake location estimation through linear wavefront theory
The exponential growth of information has accelerated the development of telecommunications infrastructure, particularly submarine communication cables. These cables not only handle massive international data transmission but also hold potential as a network for submarine earthquake monitoring. The integration of sensing technology and communications in submarine optical cable networks enables this dual functionality. In this work, we propose a novel, to our knowledge, method for submarine earthquake location estimation utilizing linear earthquake wavefronts detected through integrated sensing and communication (ISAC) submarine cables. By converting cables into dense earthquake arrays and analyzing wavefront characteristics, our approach achieves a minimum comprehensive localization error of (±0.02435 ∘ N, ±0.05025 ∘ E) compared to the official references, translating to a comprehensive error of ±6.19km. The incorporation of submarine earthquake location estimation into communication networks based on submarine optical cables offers a cost-effective solution to the long-standing issue of sparse ocean earthquake networks while providing essential earthquake data for submarine exploration and imaging.
- 26 March 2026
- Published by Optica Publishing Group in Journal of Optical Communications and Networking
- Vol. 18 (4) , B108
Submarine integrated sensing and communication cable networks enable high-precision earthquake location estimation through linear wavefront theory
The exponential growth of information has accelerated the development of telecommunications infrastructure, particularly submarine communication cables. These cables not only handle massive international data transmission but also hold potential as a network for submarine earthquake monitoring. The integration of sensing technology and communications in submarine optical cable networks enables this dual functionality. In this work, we propose a novel, to our knowledge, method for submarine earthquake location estimation utilizing linear earthquake wavefronts detected through integrated sensing and communication (ISAC) submarine cables. By converting cables into dense earthquake arrays and analyzing wavefront characteristics, our approach achieves a minimum comprehensive localization error of (±0.02435 ∘ N, ±0.05025 ∘ E) compared to the official references, translating to a comprehensive error of ±6.19km. The incorporation of submarine earthquake location estimation into communication networks based on submarine optical cables offers a cost-effective solution to the long-standing issue of sparse ocean earthquake networks while providing essential earthquake data for submarine exploration and imaging.
- 25 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (11) , 4519-4529
Non-Intrusive Characterization and Efficient Compensation of Transceiver Frequency Responses for Coherent Optical Communication System
The escalation of symbol rates in next-generation coherent optical systems (e.g., 1.6 Tb/s and beyond) significantly exacerbates influence of transceiver frequency response impairments (FRIs). The system performance is degraded by FRIs of both transmitter (Tx) and receiver (Rx), being difficult to discriminate the individual contribution of each subsystem. Nevertheless, such discrimination is essential for the optimization of state-of-the-art transceiver designs, enabling effective mitigation of impairment propagation. To address this technical challenge, we propose a non-intrusive scheme for the simultaneous characterization and separation of Tx and Rx frequency responses (FRs). By leveraging tone-shift characteristics induced by frequency offset combined with multi-tone probe signals, the proposed method digitally separates the FRs of the Tx and Rx without requiring auxiliary components. Experimental results demonstrate the proposed scheme achieves high estimation accuracy, with deviations below 1 dB in amplitude and 0.25 rd in phase across a 20-dB bandwidth of 35 GHz. Furthermore, using the monitored responses for targeted pre- and post-compensation in a 69-GBaud DP-16QAM transmission system yields up to a 2-dB improvement in OSNR sensitivity at the 7% HD-FEC threshold. In addition, when combined with a reduced-tap MIMO equalizer, the proposed scheme still preserves a 1-dB OSNR sensitivity gain while reducing the equalization complexity by approximately 44%.. Therefore, the proposed scheme provides a practical solution for in-field transceiver characterization, paving the way for simplified DSP and enhanced performance in future ultra-high-speed coherent optical interfaces.
- 25 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (11) , 4519-4529
Non-Intrusive Characterization and Efficient Compensation of Transceiver Frequency Responses for Coherent Optical Communication System
The escalation of symbol rates in next-generation coherent optical systems (e.g., 1.6 Tb/s and beyond) significantly exacerbates influence of transceiver frequency response impairments (FRIs). The system performance is degraded by FRIs of both transmitter (Tx) and receiver (Rx), being difficult to discriminate the individual contribution of each subsystem. Nevertheless, such discrimination is essential for the optimization of state-of-the-art transceiver designs, enabling effective mitigation of impairment propagation. To address this technical challenge, we propose a non-intrusive scheme for the simultaneous characterization and separation of Tx and Rx frequency responses (FRs). By leveraging tone-shift characteristics induced by frequency offset combined with multi-tone probe signals, the proposed method digitally separates the FRs of the Tx and Rx without requiring auxiliary components. Experimental results demonstrate the proposed scheme achieves high estimation accuracy, with deviations below 1 dB in amplitude and 0.25 rd in phase across a 20-dB bandwidth of 35 GHz. Furthermore, using the monitored responses for targeted pre- and post-compensation in a 69-GBaud DP-16QAM transmission system yields up to a 2-dB improvement in OSNR sensitivity at the 7% HD-FEC threshold. In addition, when combined with a reduced-tap MIMO equalizer, the proposed scheme still preserves a 1-dB OSNR sensitivity gain while reducing the equalization complexity by approximately 44%.. Therefore, the proposed scheme provides a practical solution for in-field transceiver characterization, paving the way for simplified DSP and enhanced performance in future ultra-high-speed coherent optical interfaces.