A Neuromodulation System With Real-Time Neural Signals Recovery Overlapped Temporally and Spectrally With Stimulation Artifacts
Authors:
- Geunchang SeongGSGeunchang Seong
- Jaeouk ChoJCJaeouk Cho
- Heeyoung JungHJHeeyoung Jung
- Minjae KimMKMinjae Kim
- Dongyeol SeokDSDongyeol Seok
- Su Yeon JeonSJSu Yeon Jeon
- Seonae JangSJSeonae Jang
- Changhoon SungCSChanghoon Sung
- Ul Gyu HanUHUl Gyu Han
- Seongjun ParkSeongjun Park
- Young Sang ChoYCYoung Sang Cho
- Chul KimCKChul Kim
- 20 January 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Circuits and Systems
- Vol. 20 (3) , 446-457
Abstract
Continuous neural signal acquisition during electrical stimulation is essential for neuromodulation; nevertheless, it is often hindered by high-amplitude stimulation artifacts (SAs). This study presents a neuromodulation system with an application-specific integrated circuit (ASIC) that implements 2.9$\times$ faster adaptation than a fixed parameter method for the real-time recovery of neural signals fully overlapped with stimulation artifacts in both time and frequency domains, without any prior calibration. The on-chip SA removal module leverages an adaptive infinite impulse response (IIR)-based template-subtraction method with zero-multiplier operation and low computational complexity, enabling rapid template convergence and high accuracy under time-varying SAs while optimizing area and power efficiency. The stimulator incorporates a stimulation frequency dithering mechanism to minimize neural signal loss at the stimulation frequency and its harmonics during recovery. In vitro and in vivo experimental validation, including local field potential (LFP) and action potential (AP) recordings, demonstrated real-time SA removal, achieving 40 dB reduction of SA component and preserving neural signal integrity. The ASIC, fabricated using the TSMC 65 nm CMOS LP process, occupies a total die area of 1 mm2. The SA removal module including on-chip memory occupies 0.15 mm2 and consumes 1.3 µW. The presented system enables recovery of neural signals obscured by time-varying SAs in real time, without requiring prior calibration or external processing units.Keywords
Funding Information
- National Research Foundation of Korea (NRF) and funded by Korea Government (RS-2020-NR047144)
- National Research Foundation of Korea (NRF) and funded by Korea Government (RS-2025-02219306)
- National Research Foundation of Korea (NRF) and funded by Korea Government (RS-2025-02214081)
- IC Design Education Center
This publication has 29 references indexed in Scilit:
- A Tripolar Stimulator with Return-Electrode-Based Charge-Pack Injection Technique for Charge Imbalance Correction in Spatiotemporal Stimulation2025
- Real-time removal of stimulation artifacts in closed-loop deep brain stimulationJournal of Neural Engineering, 2021
- Recording of spontaneous vagus nerve activity during Pentylenetetrazol-induced seizures in ratsJournal of Neuroscience Methods, 2020
- Track-and-Zoom Neural Analog-to-Digital Converter With Blind Stimulation Artifact RejectionIEEE Journal of Solid-State Circuits, 2020
- Signal recovery from stimulation artifacts in intracranial recordings with dictionary learningJournal of Neural Engineering, 2020
- 26.3 A Closed-Loop Neuromodulation Chipset with 2-Level Classification Achieving 1.5Vpp CM Interference Tolerance, 35dB Stimulation Artifact Rejection in 0.5ms and 97.8% Sensitivity Seizure Detection2020
- Temporally irregular electrical stimulation to the epileptogenic focus delays epileptogenesis in ratsBrain Stimulation, 2019
- A wireless and artefact-free 128-channel neuromodulation device for closed-loop stimulation and recording in non-human primatesNature Biomedical Engineering, 2018
- Irregularly timed electrical pulses reduce adaptation of retinal ganglion cellsJournal of Neural Engineering, 2018
- A bidirectional neural interface SoC with an integrated spike recorder, microstimulator, and low-power processor for real-time stimulus artifact rejectionAnalog Integrated Circuits and Signal Processing, 2015