Image Reconstruction of a Charge Coupled Device Based Optical Tomographic Instrumentation System for Particle Sizing
Open Access
- 22 October 2010
- Vol. 10 (10) , 9512-9528
Abstract
This research investigates the use of charge coupled device (abbreviated as CCD) linear image sensors in an optical tomographic instrumentation system used for sizing particles. The measurement system, consisting of four CCD linear image sensors are configured around an octagonal shaped flow pipe for a four projections system is explained. The four linear image sensors provide 2,048 pixel imaging with a pixel size of 14 micron × 14 micron, hence constituting a high-resolution system. Image reconstruction for a four-projection optical tomography system is also discussed, where a simple optical model is used to relate attenuation due to variations in optical density, [R], within the measurement section. Expressed in matrix form this represents the forward problem in tomography [S] [R] = [M]. In practice, measurements [M] are used to estimate the optical density distribution by solving the inverse problem [R] = [S]−1[M]. Direct inversion of the sensitivity matrix, [S], is not possible and two approximations are considered and compared—the transpose and the pseudo inverse sensitivity matrices.Keywords
This publication has 17 references indexed in Scilit:
- An Optical Tomography System Using a Digital Signal ProcessorSensors, 2008
- Tomographic imaging of counter-current bubbly flow by wire mesh tomographyChemical Engineering Journal, 2007
- Design of an applied optical fiber process tomography systemSensors and Actuators B: Chemical, 2005
- Optical tomography system for process measurement using light-emitting diodes as a light sourceOptical Engineering, 2004
- Intrusive Effect of Wire Mesh Tomography on Gas-liquid Flow MeasurementJournal of Nuclear Science and Technology, 2003
- Design of a novel optical tomography sensor arrayMeasurement Science and Technology, 2003
- Measurement of droplet velocity, size and refractive index using the pulse displacement techniqueMeasurement Science and Technology, 2000
- Application of image processing techniques in air/water two phase flowMechanics Research Communications, 1999
- Principles and Industrial Applications of Electrical Capacitance TomographyMeasurement and Control, 1997
- Electrical Process Tomography: Simple and Inexpensive Techniques for Process ImagingMeasurement and Control, 1997