PFAS-free Superhydrophobic Surfaces using Femtosecond Laser Processing and Hot-Filament Chemical Vapor Deposition
Preprint
- 5 April 2024
- preprint
- Published by American Chemical Society (ACS) in ChemRxiv
Abstract
Ultrashort-pulsed laser technology has revolutionized surface modification and can be a key part to generate biomimetic, superhydrophobic properties on a large scale. However, laser- structured surfaces exhibit a high surface energy directly after light-material interaction and thus need post-processing techniques to control the surface chemistry. Current research has been chiefly based on perfluorinated and polyfluorinated alkyl compounds (PFAS) to lower the surface energy, for which severe ecological and physiological concerns exist. Using hot-fila- ment chemical vapor deposition, we demonstrate the development of an, compared to fluorine- containing coatings, more environmentally friendly coating based on siloxane components, which we successfully applied on laser-structured surfaces. Creating two surface designs with a femtosecond laser, we showed that even nanoscaled protrusions are not overlaid by the ho- mogenous chemical vapor deposited polymer film. Combining a hierarchical surface topogra- phy and thin film deposition, superhydrophobic surfaces with a static contact angle of 171.6°, a contact angle hysteresis of 8.6°, a sliding angle of 4.5° and low lateral adhesion forces (FLA=9 µN) were achieved. These findings highlight the potential impact of combined ultra- short-pulsed laser technology and chemical vapor deposition polymerization for large-scale ap- plications, emphasizing an environmental alternative to PFAS.Keywords
All Related Versions
Funding Information
- Deutsche Forschungsgemeinschaft (SFB1261 project number 286471992)
- Deutsche Forschungsgemeinschaft (RTG 2154 project number 270394294)
- Deutsche Forschungsgemeinschaft (INST 264/124-1 FUGG)
This publication has 55 references indexed in Scilit:
- Designing Organic and Hybrid Surfaces and Devices with Initiated Chemical Vapor Deposition (iCVD)Advanced Materials, 2023
- Rose petal effect: A subtle combination of nano‐scale roughness and chemical variabilityNano Select, 2021
- Effect of Heat Treatment Temperature on the Wettability Transition from Hydrophilic to Superhydrophobic on Laser‐Ablated Metallic SurfacesAdvanced Engineering Materials, 2018
- Photo‐oxidation of Polymers Synthesized by Plasma and Initiated CVDChemical Vapor Deposition, 2015
- Superhydrophobic cotton fabric fabricated by electrostatic assembly of silica nanoparticles and its remarkable buoyancyApplied Surface Science, 2010
- Super-hydrophobic surface on pure magnesium substrate by wet chemical methodApplied Surface Science, 2010
- Preparation and properties of ZnO nanostructures by electrochemical anodization methodApplied Surface Science, 2010
- Superhydrophobic surfaces fabricated by microstructuring of stainless steel using a femtosecond laserApplied Surface Science, 2009
- Superhydrophobic surface directly created by electrospinning based on hydrophilic materialJournal of Materials Science, 2006
- Purity of the sacred lotus, or escape from contamination in biological surfacesPlanta, 1997