THTorge Hartig

Torge Hartig

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Torge Hartig has a total of 71 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Aerohydrogels as Tailored Cell Scaffolds

    by Torge Hartig, Margarethe Hauck, Mohammadreza Taale, Wiebke Reichstein, Gabriel Chan, Lennart Voss, Christian Rimmbach, Grace Atteh, Sadaf Pashapour, Christine Arndt, et al.

    3D hydrogels are the state-of-the-art cell scaffold materials for ex vivo cultivation and tissue engineering. Different cell and tissue types have natural environments of different mechanics, chemistries or porosities, which cannot all be satisfied by standard hydrogels. In traditional hydrogel manufacturing these properties are dependent on another. In this study new scaffold materials named Aerohydrogels of ultra-low density are created by initiated chemical vapor deposition on sacrificial tetrapodal ZnO scaffolds. This novel fabrication process enabled the independent tuning of mechanics, porosity, surface chemistry and electrical conductivity. While the stiffness can be tuned based on the crosslinking, the surface chemistry can be chosen based on selected precursors and the porosity based on the sacrificial scaffold. Aerohydrogels with lower crosslinking resulted in a lower stiffness and better applicability towards muscle cells. In multilayer Aerohydrogels electrical conductivity was incorporated into the scaffold leading to an improved cell environment. Furthermore, the ultra-low density of the scaffold allowed the stimulated beating of the scaffolds containing C2C12 cells as well as the self-contraction of iPSC-derived cardiomyocytes. With Aerohydrogels next-generation tailored cell scaffolds for any cell-type are possible, addressing emerging challenges in drug testing, tissue engineering, bioelectronics and soft robotics.

  • Open Access

    PFAS-free superhydrophobic surfaces using femtosecond laser processing and hot-filament chemical vapor deposition

    by Georg Schnell, Julia Piehl, Torge Hartig, Niklas Dubhorn, Ainura Aliyeva, Armin Springer, Thomas Strunskus, Franz Faupel, Stefan Schröder, Hermann Seitz


  • Open Access

    Functional Polymer Nanocomposites by Gas Aggregation Cluster Source and Initiated Chemical Vapor Deposition

    by Torge Hartig, Joschka Paulsen, Jonas Drewes, Asmaa T. Mohamed, Nasra F. Abdel Fattah, Cedric Hinrichs, Felix Pohl, Stefan Rehders, Ainura Aliyeva, Henning Wieker, et al.

    Functional metal‐polymer nanocomposites are required for highly tailored surface properties and coatings. However, past approaches like cosputtering, physical evaporation, or plasma polymerization can not retain the functionality of the polymer matrix or produce tailored nanoparticles. A new kind of codeposition of nanocomposite polymer thin films is presented via the combination of a gas aggregation cluster source (GAS) and initiated chemical vapor deposition (iCVD) in a common GAS+iCVD vacuum system. iCVD delivers ultraprecise and defect‐free polymer thin films on the nanoscale while a GAS creates nanoparticles that form in the gas phase and can be tuned in size and composition. Using the GAS+iCVD system, nanocomposites of well‐defined Ag nanoparticles in a chemically intact PTFE polymer thin film are prepared. The deposited nanocomposite proved applicable in antibacterial applications by decreasing the colony‐forming units of Enterococcus faecalis by 38%. Antiviral SARS‐CoV‐2 Spike‐ACE‐2 binding inhibition reaches 65% of pure silver nanoparticles. The nanocomposite improves the apoptotic gene expression for liver cancer cells compared to pure thin films. This new kind of codeposition paves the way for the fabrication of functional nanocomposite thin films combining the advantages of the iCVD polymer palette with a large variety of nanoparticles that can be prepared by GAS.


  • Open Access

    PFAS-free Superhydrophobic Surfaces using Femtosecond Laser Processing and Hot-Filament Chemical Vapor Deposition

    by Georg Schnell, Julia Piehl, Torge Hartig, Niklas Dubhorn, Ainura Aliyeva, Armin Springer, Thomas Strunskus, Franz Faupel, Stefan Schröder, Hermann Seitz

    Ultrashort-pulsed laser technology has revolutionized surface modification and can be a key part to generate biomimetic, superhydrophobic properties on a large scale. However, laser- structured surfaces exhibit a high surface energy directly after light-material interaction and thus need post-processing techniques to control the surface chemistry. Current research has been chiefly based on perfluorinated and polyfluorinated alkyl compounds (PFAS) to lower the surface energy, for which severe ecological and physiological concerns exist. Using hot-fila- ment chemical vapor deposition, we demonstrate the development of an, compared to fluorine- containing coatings, more environmentally friendly coating based on siloxane components, which we successfully applied on laser-structured surfaces. Creating two surface designs with a femtosecond laser, we showed that even nanoscaled protrusions are not overlaid by the ho- mogenous chemical vapor deposited polymer film. Combining a hierarchical surface topogra- phy and thin film deposition, superhydrophobic surfaces with a static contact angle of 171.6°, a contact angle hysteresis of 8.6°, a sliding angle of 4.5° and low lateral adhesion forces (FLA=9 µN) were achieved. These findings highlight the potential impact of combined ultra- short-pulsed laser technology and chemical vapor deposition polymerization for large-scale ap- plications, emphasizing an environmental alternative to PFAS.


  • Open Access

    A freestanding photoswitchable aero-polymer with an incorporated bridged azobenzene: 3D structure, photoinduced motion, biocompatibility and potential application as photomechanical cell scaffold

    by Maximilian H. Burk, Daniel Hagenbusch, Christine Arndt, Lukas Pott, Margarethe Hauck, Jonas Drewes, Stefan Rehders, Thomas Strunskus, Torge Hartig, Christine Selhuber-Unkel, et al.

    Photoswitchable polymers are of great interest for a variety of applications such as optical data storage, functional membranes and photoactuators. The latter are typically fabricated by wet-chemical approaches including gels, liquid-crystalline elastomers and supramolecular polymers. In this work we demonstrate the fabrication of a new freestanding photoswitchable aeropolymer-structure via solvent-free, single-step initiated chemical vapor deposition (iCVD) using tetrapodal zinc oxide (t-ZnO) as sacrificial substrate material. On the molecular scale, the copolymer is composed of 2-hydroxyethyl methacrylate (HEMA) and a specifically synthesized diazocine (a bridged azobenzene) as photoswitchable cross-linking unit. iCVD enables in this connection a combination of both comonomers while preserving their chemical functionalities as well as the individual structure of the t-ZnO templates without pore clogging. After post-reactional etching and drying, a hollow polymer network with nanoscopic thin walls remains maintaining the substrate characteristic tetrapodal structure, which we coined aero-photoswitch. We identify and differentiate specific properties of the fabricated structures, originating from the switchable copolymer and the highly porous tetrapodal conformation, for a comprehensive description of the overall aero-structures. These aero-photoswitchable polymers provide unique properties due to their extremely delicate yet stable morphology and their efficient transformation of molecular photoisomerization to motion on the macroscopic scale upon illumination with blue light. In addition, we investigate their biocompatibility as well as successful cell attachment and proliferation. These new photoswitchable actuators turn out to be highly promising smart materials for future research on photoswitchable scaffolds.


  • Open Access

    Tailoring of Mg and MgLi thin-film corrosion rates with dielectric barrier discharge plasma treatment

    by Lisa Hanke, Torge Hartig, Felix Weisheit, Tim Tjardts, Tim Pogoda, Franz Faupel, Eckhard Quandt

    Magnesium and magnesium alloys such as magnesium-lithium are of great interest for the application as biodegradable implants. To control the degradation, a tailoring of the corrosion rate is needed. In this study, the effect of a short (5–20 s) dielectric barrier discharge plasma treatment in ambient air on the corrosion rate of magnetron sputtered Mg and MgLi thin films is presented. The treatment with atmospheric plasma of as sputtered samples leads to a decrease of the corrosion rate of 45%−50% in Hanks’ balanced salt solution. The higher corrosion resistance is influenced by a change in surface structure and a formation of an MgCO3 containing film.


  • Open Access

    Decontaminative Properties of Cold Atmospheric Plasma Treatment on Collagen Membranes Used for Guided Bone Regeneration

    by Aydin Gülses, Lina Dohrmann, Oral Cenk Aktas, Juliane Wagner, Salih Veziroglu, Tim Tjardts, Torge Hartig, Kim Rouven Liedtke, Jörg Wiltfang, Yahya Acil, et al.

    Background cold atmospheric plasma (CAP) is known to be a surface-friendly yet antimicrobial and activating process for surfaces such as titanium. The aim of the present study was to describe the decontaminating effects of CAP on contaminated collagen membranes and their influence on the properties of this biomaterial in vitro. Material and Methods: A total of n = 18 Bio-Gide® (Geistlich Biomaterials, Baden-Baden, Germany) membranes were examined. The intervention group was divided as follows: n = 6 membranes were treated for one minute, and n = 6 membranes were treated for five minutes with CAP using kINPen® MED (neoplas tools GmbH, Greifswald, Germany) with an output of 5 W, respectively. A non-CAP-treated group (n = 6) served as the control. The topographic alterations were evaluated via X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Afterward, the samples were contaminated with E. faecalis for 6 days, and colony-forming unit (CFU) counts and additional SEM analyses were performed. The CFUs increased with CAP treatment time in our analyses, but SEM showed that the surface of the membranes was essentially free from bacteria. However, the deeper layers showed remaining microbial conglomerates. Furthermore, we showed, via XPS analysis, that increasing the CAP time significantly enhances the carbon (carbonyl group) concentration, which also correlates negatively with the decontaminating effects of CAP. Conclusions: Reactive carbonyl groups offer a potential mechanism for inhibiting the growth of E. faecalis on collagen membranes after cold atmospheric plasma treatment.


  • Precise localization of DBD plasma streamers using topographically patterned insulators for maskless structural and chemical modification of surfaces

    by O. Polonskyi, T. Hartig, J. R. Uzarski, M. J. Gordon

    Dielectric insulators with patterned topographic relief were used in dielectric barrier discharge (DBD) plasmas operating at atmospheric pressure to spatially define the formation of filamentary microdischarges (“plasma streamers”). Precise localization of microdischarge streamers is demonstrated with concomitant treatment patterns on surfaces, enabling localized etching, surface micro-texturing, and chemically and structurally induced wettability modification without the use of lithographic masks on the sample. Proof-of-concept examples include generation of arbitrary streamer patterns (lines, arrays, and letters), anisotropic etching of PMMA films, and spatial patterning of Teflon to be hydrophilic. The approach herein allows user-defined patterning of DBD streamers for subsequent modification and treatment of surfaces (e.g., roughness, wettability, etc.), materials deposition, or etching.


  • (Invited) Bio-Inspired High-Performance and Multi-Functional Surfaces Tailored By Atmospheric Pressure Plasmas

    by Oleksandr Polonskyi, Torge Hartig, Joshua R Uzarski, Michael J Gordon

    This talk will highlight our recent work on the development of atmospheric pressure plasma tools and methods to modify the roughness, surface chemistry, and wettability of dielectric, polymer, and textile surfaces. Dielectric barrier discharges (DBD) at both low (60 Hz) and high frequency (10s kHz, pulsed), along with RF (13.56 MHz) microplasma jets, were used to directly create hydrophobic/philic areas and bio-reactive groups (-COOH, -CFx, -NH2) on surfaces for subsequent immobilization of enzymes and bioactive compounds for sensing, environmental threat detection, and chemical agent destruction. The goal of the work is to provide fundamental understanding of how interfacial properties, namely chemical termination and surface area, roughness geometry and length scale, and incorporation of 2D/3D nanostructures, can impart multi-functionality to different material surfaces. The effect of various plasma operating conditions (e.g., streamer density, frequency, gas atmosphere, power) on wettability contrast, roughness, surface chemistry, and enzyme grafting and viability for different model surfaces will be discussed.