A simulation-based investigation of the production routes of the positron-emitting radionuclide 128Cs using GEANT4, TALYS, and EMPIRE codes for medical applications
Open Access
- 19 July 2026
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Abstract
Due to its suitable half-life of 3.62 min and positron emission, 128Cs (Iβ+ = 61%; Eβ+ = 2.885 MeV) is a favorable radionuclide for applying in positron emission tomography (PET) imaging. In this work, the production 128Cs radionuclide via the indirect reaction of 133Cs(p,6n)128Ba→128Cs and two new direct reactions of 127I(3He,2n)128Cs and 127Xe(d, n)128Cs was predict using the Monte Carlo GEANT4-10.7 toolkit, the Monte Carlo SRIM-2013-Pro code, the EMPIRE-3.2.3 software, and the TALYS-2.0 package. The range and stopping power values of protons, deuterons, and 3He particles within the 133Cs, 127Xe, and 127I targets were calculated by the GEANT4 and SRIM codes. Moreover, the cross-section of the mentioned reactions was computed utilizing the GEANT4, EMPIRE, TALYS (OMPs, BSFGM, CGCM, and GSM models) codes. To estimate the production yield of the mentioned reactions, the optimum energy range for the 133Cs(p,6n)128Ba→128Cs, 127I(3He,2n)128Cs, and 127Xe(d, n)128Cs reactions were selected (48–68 MeV), (5–10 MeV), and (9–20 MeV), respectively. The previous experimental cross-section and production yield of the 133Cs(p,6n)128Ba→128Cs reaction was compared with the present simulated values of the GEANT4, TALYS, and EMPIRE codes. A good compatibility between the experimental data and simulated values was observed. The good agreement between the experimental data and simulated results is a proof that using a combination of nuclear codes like GEANT4, SRIM, TALYS, and EMPIRE for studying the nuclear reactions can be a good method before performing them practically.Keywords
This publication has 31 references indexed in Scilit:
- Cross section calculations for deuteron induced reactions of 10,11B and 12C nucleiIndian Journal of Physics, 2024
- Cross section calculation of (n,p) and (n,2n) nuclear reactions on Zn, Mo and Pb isotopes with ~ 14 MeV neutronsJournal of Radioanalytical and Nuclear Chemistry, 2019
- Cross-sections for (p,x) reactions on natural chromium for the production of 52,52m,54Mn radioisotopesApplied Radiation and Isotopes, 2015
- Proton-induced cross-sections of nuclear reactions on lead up to 37MeVApplied Radiation and Isotopes, 2014
- Evaluation of excitation functions of 100Mo(p,d+pn)99Mo and 100Mo (p,2n)99mTc reactions: Estimation of long-lived Tc-impurity and its implication on the specific activity of cyclotron-produced 99mTcApplied Radiation and Isotopes, 2014
- Limitation of the long-lived 121Te contaminant in production of 123I through the 124Xe(p,x) routeApplied Radiation and Isotopes, 2011
- Experimental studies and nuclear model calculations on proton induced reactions on manganese up to 45MeV with reference to production of 55Fe, 54Mn and 51CrApplied Radiation and Isotopes, 2010
- Production of 38K via the 38Ar(p, n)-process at a small cyclotronInternational Journal of Radiation Applications and Instrumentation. Part A. Applied Radiation and Isotopes, 1992
- Cyclotron production of 128Cs (3.62 min). A new positron-emitting radionuclide for medical applicationsThe International Journal of Applied Radiation and Isotopes, 1982
- Excitation functions for the production of bromine-75: A potential nuclide for the labelling of radiopharmaceuticalsThe International Journal of Applied Radiation and Isotopes, 1980