Double‐layer wideband reflectarray using polynomial optimization technology
- 18 February 2021
- journal article
- research article
- Published by Hindawi Limited in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (5) , e22594
Abstract
In this article, a novel double‐layer wideband reflectarray antenna using polynomial optimization technology is proposed. The reflectarray element has two main variable parameters. When each of the variables is adjusted, the reflectarray element cannot achieve 360° phase shift. However, as the two variables work together, 360° phase shift is easy to be achieved. The polynomial technology is used to connect the two variables, and the differential evolution algorithm is adopted to optimize the element to obtain the appropriate polynomial coefficients. The phase shift curves of different frequencies are parallel to each other and the slopes of the phase shift curves are consistent, which makes the proposed element achieve wideband characteristics. In order to verify the correctness of the proposed design method and reflectarray element, a 441‐element reflectarray antenna was designed, processed, and measured. The proposed reflectarray antenna achieves 35% 1‐dB gain bandwidth. At 12 GHz, the gain and efficiency of the proposed reflectarray antenna are 29 dBi and 62% respectively. In the whole bandwidth, the sidelobe was less than –16 dB and the cross‐polarization was less than –38 dB. It is proved that polynomial automatic optimization technology can guide the design of the multi‐variable wideband reflectarray antenna.Keywords
This publication has 12 references indexed in Scilit:
- A Wideband, Single-Layer Reflectarray Exploiting a Polarization Rotating Unit CellIEEE Transactions on Antennas and Propagation, 2018
- Broadband single‐layer reflectarray antenna for X‐band applicationsIET Microwaves, Antennas & Propagation, 2018
- A Wideband Reflectarray Antenna Using Substrate Integrated Coaxial True-Time Delay Lines for QLink-Pan ApplicationsIEEE Antennas and Wireless Propagation Letters, 2017
- A Broadband Reflectarray Antenna Using Triple Gapped Rings With Attached Phase-Delay LinesIEEE Transactions on Antennas and Propagation, 2017
- Design of a Broadband Single-Layer Linearly Polarized Reflectarray Using Four-Arm Spiral ElementsIEEE Antennas and Wireless Propagation Letters, 2016
- Broadband Reflectarray Antenna Using Subwavelength Elements Based on Double Square Meander-Line RingsIEEE Transactions on Antennas and Propagation, 2015
- Broadband Microstrip Reflectarray With Five Parallel Dipole ElementsIEEE Antennas and Wireless Propagation Letters, 2015
- A Single-Layer Broadband Reflectarray Antenna by Using Quasi-spiral Phase Delay LineIEEE Antennas and Wireless Propagation Letters, 2014
- An X-Band Reflectarray With Novel Elements and Enhanced BandwidthIEEE Antennas and Wireless Propagation Letters, 2013
- Broadband Reflectarray Antennas Using Double-Layer Subwavelength Patch ElementsIEEE Antennas and Wireless Propagation Letters, 2010