Constant Power Output Wireless Charging System for Automatic Guided Vehicle Using the Primary Side Controllable Magnetic Flux Capacitor
- 24 September 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (3) , 4351-4365
Abstract
This article proposes a novel primary side controllable magnetic flux capacitor (CMFC) for a wireless charging system (WCS) in automatic guided vehicles (AGVs). It aims to address two challenges: zero-voltage switching (ZVS) for the full-bridge inverter and constant power (CP) charging for the battery, which are affected by variations in the transmitter coil’s self-inductance and the magnetic coupler’s mutual inductance, as well as the battery’s equivalent load resistance. The CMFC also replaces the resonant capacitor on the primary side. First, the circuit structure of the designed WCS for AGVs and the two problems existing in it are analyzed. Therefore, the CMFC is proposed to address the drawbacks of similar existing methods in resolving these problems. Second, from the hardware aspects, the concept of “controllable magnetic flux principle” and parameter design method for the CMFC is given. From the software aspects, the closed-loop control strategy for the WCS with CMFC is given. Finally, an engineering prototype is constructed. It verifies that the designed WCS can achieve 350-W CP charging and 92.7% efficiency with equivalent load resistance from 2.57 to 8.33 Ω and misalignment up to 40% or 10% of the transmitter coil’s width in x- or y-direction.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (2572023CT15)
- China Postdoctoral Science Foundation (2022M710641)
- National Natural Science Foundation of China (52107001)
This publication has 45 references indexed in Scilit:
- Adaptive Tube-Based Model Predictive Control for the Receiving-Side DC–DC of Dynamic Wireless Power Transfer SystemIEEE Journal of Emerging and Selected Topics in Power Electronics, 2024
- A Fast Primary-Side Current and Voltage Control for Direct Wireless Battery ChargersIEEE Journal of Emerging and Selected Topics in Power Electronics, 2023
- Variable Inductor Control for Misalignment Tolerance and Constant Current/Voltage Charging in Inductive Power Transfer SystemIEEE Journal of Emerging and Selected Topics in Power Electronics, 2023
- Design and Analysis of Misalignment Insensitive Wireless Power Transfer System Based on Multitransmitter for Constant PowerIEEE Journal of Emerging and Selected Topics in Power Electronics, 2023
- Design of LCC-S Compensation Topology and Optimization of Misalignment Tolerance for Inductive Power TransferIEEE Access, 2020
- A High-Efficiency ZVS Wireless Power Transfer System for Electric Vehicle Charging WithVariable Angle Phase Shift ControlIEEE Journal of Emerging and Selected Topics in Power Electronics, 2020
- Analysis and Design of Three-Coil Structure WPT System With Constant Output Current and Voltage for Battery Charging ApplicationsIEEE Access, 2019
- An optimized frequency and phase shift control strategy for constant current charging and zero voltage switching operation in series-series compensated wireless power transmission2017
- Maximum efficiency tracking in wireless power transfer for battery charger: Phase shift and frequency control2017
- Primary-Side Power Flow Control of Wireless Power Transfer for Electric Vehicle ChargingIEEE Journal of Emerging and Selected Topics in Power Electronics, 2014