Dechun Yuan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dechun Yuan has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Jiali Liu
School of Computer and Control Engineering, Northeast Forestry University, Harbin 150040, China
4 shared publications - Linxuan Li
School of Computer and Control Engineering, Northeast Forestry University, Harbin 150040, China
4 shared publications - Chaoyue Zhao
College of Computer and Control Engineering, Northeast Forestry University, Harbin 150040, China
2 shared publications - Yiqi Liu
Northeast Forestry University
2 shared publications - Zhenjie Li
College of Computer and Control Engineering, Northeast Forestry University, Harbin, China
2 shared publications - Zhihao Han
School of Computer and Control Engineering, Northeast Forestry University, Harbin 150040, China
2 shared publications
Latest Publications
- Open Access
- 2 July 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (13) , 6636
Graph Attention-Based Distillation for Self-Alignment Localization of UAV Wireless Charging
To address the residual lateral coil misalignment after an unmanned aerial vehicle (UAV) lands on a fixed wireless-charging platform, this study proposes a graph-attention-based knowledge distillation method for embedded self-alignment localization. Four detection-coil voltages form an induced-voltage fingerprint database organized as a multi-scale spatial graph. A graph attention network (GAT) teacher model is trained offline to learn neighborhood correlations in the voltage–position mapping, and its spatial knowledge is distilled into a lightweight Tiny-MLP student model for microcontroller unit (MCU)-based online inference. Experimental results show that the GAT teacher achieves a mean absolute error (MAE) of 0.589 cm, while the distilled Tiny-MLP reduces the MAE of the directly trained Tiny-MLP from 1.548 cm to 1.148 cm (a 25.8% reduction under a fixed seed). In 2000 closed-loop alignment trials with random initial positions, the system achieves an 85.5% success rate under a 0.5 cm threshold, indicating that the method supports low-complexity closed-loop self-alignment for UAV wireless charging.
- 2 July 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (13) , 6636
Open AccessGraph Attention-Based Distillation for Self-Alignment Localization of UAV Wireless Charging
To address the residual lateral coil misalignment after an unmanned aerial vehicle (UAV) lands on a fixed wireless-charging platform, this study proposes a graph-attention-based knowledge distillation method for embedded self-alignment localization. Four detection-coil voltages form an induced-voltage fingerprint database organized as a multi-scale spatial graph. A graph attention network (GAT) teacher model is trained offline to learn neighborhood correlations in the voltage–position mapping, and its spatial knowledge is distilled into a lightweight Tiny-MLP student model for microcontroller unit (MCU)-based online inference. Experimental results show that the GAT teacher achieves a mean absolute error (MAE) of 0.589 cm, while the distilled Tiny-MLP reduces the MAE of the directly trained Tiny-MLP from 1.548 cm to 1.148 cm (a 25.8% reduction under a fixed seed). In 2000 closed-loop alignment trials with random initial positions, the system achieves an 85.5% success rate under a 0.5 cm threshold, indicating that the method supports low-complexity closed-loop self-alignment for UAV wireless charging.
- Open Access
HVC-NSGA-III with Thermal–Electrochemical Degradation Coupling for Four-Objective Day-Ahead BESS Dispatch and SOH-Adaptive Knee-Point Selection
Isothermal dispatch models for battery energy storage systems (BESSs) systematically underestimate degradation costs because dispatch-induced Joule heating elevates cell temperature and accelerates ageing through Arrhenius-type kinetics. This paper proposes three integrated contributions. First, a thermal–electrochemical coupling loop embeds a first-order lumped thermal model within the dispatch simulation: cell temperature is updated from I2R heat generation and Newton cooling at each time step, and the resulting temperature trajectory feeds into the Arrhenius stress factors of a semi-empirical degradation model combining -based calendar ageing with Rainflow-based cycle ageing, enabling the optimiser to discover thermally self-regulating strategies. This coupling is critical because, as the results demonstrate, ignoring it leads to systematic underestimation of degradation costs by up to 13%. Second, the resulting four-objective problem (negative profit, thermally coupled degradation cost, SOC deviation, and CVaR imbalance penalty) is solved by a hypervolume-contribution-enhanced NSGA-III (HVC-NSGA-III), which augments reference-point selection with an archive pruned by removing the solution of the smallest individual hypervolume contribution, concentrating Pareto resolution in the knee region. Third, an SOH-adaptive knee-point selection assigns the degradation weight as a monotone function of ageing degree , automatically tightening dispatch conservatism as remaining useful life diminishes. Simulations on ENTSO-E data over 96 h show the following: (i) thermal coupling shifts the Pareto front by 8–15% in the degradation dimension with temperature excursions up to 7 K; (ii) HVC-NSGA-III improves hypervolume by 8.7% over standard NSGA-III; (iii) SOH-adaptive selection reduces capacity loss by 27.4% at only 9.1% revenue cost; and (iv) ablation confirms Rainflow (24.8%) and thermal coupling (13.1%) as the two largest contributors.Open AccessHVC-NSGA-III with Thermal–Electrochemical Degradation Coupling for Four-Objective Day-Ahead BESS Dispatch and SOH-Adaptive Knee-Point Selection
Isothermal dispatch models for battery energy storage systems (BESSs) systematically underestimate degradation costs because dispatch-induced Joule heating elevates cell temperature and accelerates ageing through Arrhenius-type kinetics. This paper proposes three integrated contributions. First, a thermal–electrochemical coupling loop embeds a first-order lumped thermal model within the dispatch simulation: cell temperature is updated from I2R heat generation and Newton cooling at each time step, and the resulting temperature trajectory feeds into the Arrhenius stress factors of a semi-empirical degradation model combining -based calendar ageing with Rainflow-based cycle ageing, enabling the optimiser to discover thermally self-regulating strategies. This coupling is critical because, as the results demonstrate, ignoring it leads to systematic underestimation of degradation costs by up to 13%. Second, the resulting four-objective problem (negative profit, thermally coupled degradation cost, SOC deviation, and CVaR imbalance penalty) is solved by a hypervolume-contribution-enhanced NSGA-III (HVC-NSGA-III), which augments reference-point selection with an archive pruned by removing the solution of the smallest individual hypervolume contribution, concentrating Pareto resolution in the knee region. Third, an SOH-adaptive knee-point selection assigns the degradation weight as a monotone function of ageing degree , automatically tightening dispatch conservatism as remaining useful life diminishes. Simulations on ENTSO-E data over 96 h show the following: (i) thermal coupling shifts the Pareto front by 8–15% in the degradation dimension with temperature excursions up to 7 K; (ii) HVC-NSGA-III improves hypervolume by 8.7% over standard NSGA-III; (iii) SOH-adaptive selection reduces capacity loss by 27.4% at only 9.1% revenue cost; and (iv) ablation confirms Rainflow (24.8%) and thermal coupling (13.1%) as the two largest contributors. - Open Access
- 31 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (7) , 3393
Data-Efficient Multi-Objective Design of Auxiliary Localization Coils for Misalignment-Robust UAV WPT
To address the challenges of difficult quantitative design and potential coil mismatch in auxiliary coils within wireless power transfer systems, a data-driven parameter optimization method based on multi-objective particle swarm optimization (MOPSO) was proposed. First, based on the inductor–capacitor–capacitor series (LCC-S) compensation topology, a mechanism-based analysis was conducted, establishing coil side length A and number of turns N as core optimization variables. Subsequently, a collaborative optimization framework integrating “parametric simulation–surrogate modeling–active learning” was established. An offline fingerprint database was constructed via finite element simulation, and a high-accuracy surrogate model was developed using a kernel ridge regression ensemble approach. Active learning strategies were employed to adaptively augment data points and mitigate uncertainty. Finally, the multi-objective particle swarm optimization (MOPSO) algorithm was applied to identify the Pareto-optimal solution set. Experimental results reveal that the optimized auxiliary coil parameters achieved positioning errors below 8 mm at all test points. The maximum positioning error was significantly reduced by approximately 80% compared to the traditional empirical approach, providing a useful parameter-selection reference for high-precision wireless charging alignment systems under the investigated static operating conditions.
- 31 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (7) , 3393
Open AccessData-Efficient Multi-Objective Design of Auxiliary Localization Coils for Misalignment-Robust UAV WPT
To address the challenges of difficult quantitative design and potential coil mismatch in auxiliary coils within wireless power transfer systems, a data-driven parameter optimization method based on multi-objective particle swarm optimization (MOPSO) was proposed. First, based on the inductor–capacitor–capacitor series (LCC-S) compensation topology, a mechanism-based analysis was conducted, establishing coil side length A and number of turns N as core optimization variables. Subsequently, a collaborative optimization framework integrating “parametric simulation–surrogate modeling–active learning” was established. An offline fingerprint database was constructed via finite element simulation, and a high-accuracy surrogate model was developed using a kernel ridge regression ensemble approach. Active learning strategies were employed to adaptively augment data points and mitigate uncertainty. Finally, the multi-objective particle swarm optimization (MOPSO) algorithm was applied to identify the Pareto-optimal solution set. Experimental results reveal that the optimized auxiliary coil parameters achieved positioning errors below 8 mm at all test points. The maximum positioning error was significantly reduced by approximately 80% compared to the traditional empirical approach, providing a useful parameter-selection reference for high-precision wireless charging alignment systems under the investigated static operating conditions.
- Open Access
- 30 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (7) , 3318
Position Identification for UAV Wireless Charging Coupler Using Neural Network and Voltage Fingerprint
In response to the significantly reduced efficiency of magnetic coupling wireless charging for unmanned aerial vehicles (UAVs) caused by their high sensitivity to transmitter and receiver coil alignment, as well as landing point errors, a position identification method based on the detection coil-induced voltage fingerprint and embedded neural network regression is proposed. This enables position alignment through a 2D mechanical structure. Firstly, by means of an S–S compensation topology with a bipolar (BP) symmetrical four-detection-coil array deployed at the transmitter, the system effectively suppresses primary direct coupling, ensuring that the position of the receiver coil predominantly determines the detection signals. Secondly, by establishing a voltage fingerprint database during the offline stage and utilizing a multi-layer perceptron–radial basis function (MLP-RBF) regression model, the system achieves high-precision end-to-end positioning and alignment control during the online stage through induced voltage acquisition and data processing. Finally, experiments demonstrate that the proposed method achieves centimeter-level positioning accuracy, with an average error of approximately 1.2 cm and a maximum error of less than 1.8 cm, presenting excellent deployability and engineering applicability.
- 30 March 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (7) , 3318
Open AccessPosition Identification for UAV Wireless Charging Coupler Using Neural Network and Voltage Fingerprint
In response to the significantly reduced efficiency of magnetic coupling wireless charging for unmanned aerial vehicles (UAVs) caused by their high sensitivity to transmitter and receiver coil alignment, as well as landing point errors, a position identification method based on the detection coil-induced voltage fingerprint and embedded neural network regression is proposed. This enables position alignment through a 2D mechanical structure. Firstly, by means of an S–S compensation topology with a bipolar (BP) symmetrical four-detection-coil array deployed at the transmitter, the system effectively suppresses primary direct coupling, ensuring that the position of the receiver coil predominantly determines the detection signals. Secondly, by establishing a voltage fingerprint database during the offline stage and utilizing a multi-layer perceptron–radial basis function (MLP-RBF) regression model, the system achieves high-precision end-to-end positioning and alignment control during the online stage through induced voltage acquisition and data processing. Finally, experiments demonstrate that the proposed method achieves centimeter-level positioning accuracy, with an average error of approximately 1.2 cm and a maximum error of less than 1.8 cm, presenting excellent deployability and engineering applicability.
- Open Access
- 23 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 45088-45103
A Wireless Charging Alignment Strategy Under Complex Working Conditions Using Voltage Fingerprints and a Residual-Calibrated Ensemble Network
Magnetically coupled wireless power transfer is highly sensitive to the relative height between the transmitter and receiver coils. Meanwhile, complex electromagnetic interference and measurement noise induce fluctuations in the voltage fingerprints and degrade the fingerprint-library quality, which in turn leads to an unstable closed-loop alignment. To address these issues, this study proposes a position identification and closed-loop alignment method based on decoupled sensing-coil voltage fingerprints and integrated neural network regression. First, a four-quadrant symmetric decoupled sensing-coil array is deployed at the transmitter, and a compensation network is introduced to suppress direct-coupling effects. Thus, the multi-channel sensing voltages are primarily driven by the planar position variation of the receiver coil, thereby forming voltage fingerprints with improved spatial separability. Second, an original evaluation metric for centimeter-level alignment reliability is developed, and a lightweight residual calibration strategy is designed to target hard samples and tail errors to alleviate the error amplification caused by fingerprint noise and distribution imbalance. On this basis, a multi-model fusion integrated neural network is constructed to enhance disturbance rejection and prediction consistency. Finally, closed-loop alignment experiments are conducted over a two-dimensional workspace and compared with representative baseline methods. The results demonstrate that the proposed method achieves more concentrated terminal alignment positions and more stable closed-loop behavior, even when the fingerprint library is of low quality, thus validating its engineering applicability and robust alignment capability.
- 23 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 45088-45103
Open AccessA Wireless Charging Alignment Strategy Under Complex Working Conditions Using Voltage Fingerprints and a Residual-Calibrated Ensemble Network
Magnetically coupled wireless power transfer is highly sensitive to the relative height between the transmitter and receiver coils. Meanwhile, complex electromagnetic interference and measurement noise induce fluctuations in the voltage fingerprints and degrade the fingerprint-library quality, which in turn leads to an unstable closed-loop alignment. To address these issues, this study proposes a position identification and closed-loop alignment method based on decoupled sensing-coil voltage fingerprints and integrated neural network regression. First, a four-quadrant symmetric decoupled sensing-coil array is deployed at the transmitter, and a compensation network is introduced to suppress direct-coupling effects. Thus, the multi-channel sensing voltages are primarily driven by the planar position variation of the receiver coil, thereby forming voltage fingerprints with improved spatial separability. Second, an original evaluation metric for centimeter-level alignment reliability is developed, and a lightweight residual calibration strategy is designed to target hard samples and tail errors to alleviate the error amplification caused by fingerprint noise and distribution imbalance. On this basis, a multi-model fusion integrated neural network is constructed to enhance disturbance rejection and prediction consistency. Finally, closed-loop alignment experiments are conducted over a two-dimensional workspace and compared with representative baseline methods. The results demonstrate that the proposed method achieves more concentrated terminal alignment positions and more stable closed-loop behavior, even when the fingerprint library is of low quality, thus validating its engineering applicability and robust alignment capability.
- 5 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (5) , 8663-8675
Dynamic Temperature Prediction of the Magnetic Coupler in Wireless Charging Systems
As the core component of wireless charging systems, the magnetic coupler usually accounts for a significant proportion of total system power losses, resulting in substantial cumulative temperature rise. This article proposes a multipoint dynamic temperature prediction method for magnetic couplers, integrating multiphysics finite-element simulation with a deep learning algorithm to achieve real-time, accurate prediction of temperature variations under ambient temperature fluctuations, coil misalignment, and continuous charging conditions. First, an electromagnetic-thermal coupled model is constructed using the finite-element method to generate temperature datasets under various operating conditions. Then, the random forest algorithm analyzed the influence of input parameters on temperature predictions at different timesteps, screening key variables as model inputs. A dynamic temperature prediction model combines long short-term memory networks with a temporal self-attention mechanism. Finally, the model outputs show that the method outperforms conventional prediction accuracy and speed approaches. Finally, a 3.3 kW experimental prototype was built to simulate continuous charging scenarios under varying coil misalignment conditions, with real-time temperature acquisition at key locations of the magnetic coupler. Experimental results show average prediction errors of 5.7%, validating the correctness of the proposed method.
- 5 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (5) , 8663-8675
Dynamic Temperature Prediction of the Magnetic Coupler in Wireless Charging Systems
As the core component of wireless charging systems, the magnetic coupler usually accounts for a significant proportion of total system power losses, resulting in substantial cumulative temperature rise. This article proposes a multipoint dynamic temperature prediction method for magnetic couplers, integrating multiphysics finite-element simulation with a deep learning algorithm to achieve real-time, accurate prediction of temperature variations under ambient temperature fluctuations, coil misalignment, and continuous charging conditions. First, an electromagnetic-thermal coupled model is constructed using the finite-element method to generate temperature datasets under various operating conditions. Then, the random forest algorithm analyzed the influence of input parameters on temperature predictions at different timesteps, screening key variables as model inputs. A dynamic temperature prediction model combines long short-term memory networks with a temporal self-attention mechanism. Finally, the model outputs show that the method outperforms conventional prediction accuracy and speed approaches. Finally, a 3.3 kW experimental prototype was built to simulate continuous charging scenarios under varying coil misalignment conditions, with real-time temperature acquisition at key locations of the magnetic coupler. Experimental results show average prediction errors of 5.7%, validating the correctness of the proposed method.
- 24 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (3) , 4351-4365
Constant Power Output Wireless Charging System for Automatic Guided Vehicle Using the Primary Side Controllable Magnetic Flux Capacitor
This article proposes a novel primary side controllable magnetic flux capacitor (CMFC) for a wireless charging system (WCS) in automatic guided vehicles (AGVs). It aims to address two challenges: zero-voltage switching (ZVS) for the full-bridge inverter and constant power (CP) charging for the battery, which are affected by variations in the transmitter coil’s self-inductance and the magnetic coupler’s mutual inductance, as well as the battery’s equivalent load resistance. The CMFC also replaces the resonant capacitor on the primary side. First, the circuit structure of the designed WCS for AGVs and the two problems existing in it are analyzed. Therefore, the CMFC is proposed to address the drawbacks of similar existing methods in resolving these problems. Second, from the hardware aspects, the concept of “controllable magnetic flux principle” and parameter design method for the CMFC is given. From the software aspects, the closed-loop control strategy for the WCS with CMFC is given. Finally, an engineering prototype is constructed. It verifies that the designed WCS can achieve 350-W CP charging and 92.7% efficiency with equivalent load resistance from 2.57 to 8.33 Ω and misalignment up to 40% or 10% of the transmitter coil’s width in x- or y-direction.
- 24 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (3) , 4351-4365
Constant Power Output Wireless Charging System for Automatic Guided Vehicle Using the Primary Side Controllable Magnetic Flux Capacitor
This article proposes a novel primary side controllable magnetic flux capacitor (CMFC) for a wireless charging system (WCS) in automatic guided vehicles (AGVs). It aims to address two challenges: zero-voltage switching (ZVS) for the full-bridge inverter and constant power (CP) charging for the battery, which are affected by variations in the transmitter coil’s self-inductance and the magnetic coupler’s mutual inductance, as well as the battery’s equivalent load resistance. The CMFC also replaces the resonant capacitor on the primary side. First, the circuit structure of the designed WCS for AGVs and the two problems existing in it are analyzed. Therefore, the CMFC is proposed to address the drawbacks of similar existing methods in resolving these problems. Second, from the hardware aspects, the concept of “controllable magnetic flux principle” and parameter design method for the CMFC is given. From the software aspects, the closed-loop control strategy for the WCS with CMFC is given. Finally, an engineering prototype is constructed. It verifies that the designed WCS can achieve 350-W CP charging and 92.7% efficiency with equivalent load resistance from 2.57 to 8.33 Ω and misalignment up to 40% or 10% of the transmitter coil’s width in x- or y-direction.
- 23 January 2025
- Published by Springer Nature in Journal of Power Electronics
- Vol. 25 (6) , 1166-1174
UAV wireless charging system with high anti-misalignment capability and constant current/voltage outputs
- 23 January 2025
- Published by Springer Nature in Journal of Power Electronics
- Vol. 25 (6) , 1166-1174
UAV wireless charging system with high anti-misalignment capability and constant current/voltage outputs