Effects of copper fillers on mechanical and electrical properties of selective laser sintered PA 12-Cu composites
- 23 August 2021
- journal article
- research article
- Published by Taylor & Francis in Materials Technology
- Vol. 37 (10) , 1541-1553
Abstract
Selective Laser Sintering (SLS) is a widely used additive manufacturing (AM) technique for creating 3D geometries by adding materials in layers. Although neat polymer is mainly used in powder forms for production, organic or inorganic fillers can be added to produce polymer composites by SLS method. In this study, Polyamide 12 (PA 12) matrix composite parts filled with two different copper particles, dendritic and spherical shaped, were produced, and their mechanical, structural and electrical properties were investigated. The present study outlined that by increasing incident energy densities during sample fabrication, changes in mechanical and electrical characteristics were examined. The findings were analysed in terms of filler type and energy input, which were discovered to have a slight change in the bending behaviour of SLS components. Furthermore, the impact strength was shown to increase constantly with increasing energy density. Furthermore, whereas the electrical conductivity of spherical Cu-filled parts rose considerably, no significant change was seen in dendritic-shaped Cu-filled parts.Keywords
This publication has 23 references indexed in Scilit:
- Development of Additive Manufacturing Technology2015
- Experimental Investigation of SLS Process for Flexural Strength Improvement of PA-3200GF PartsMaterials and Manufacturing Processes, 2014
- Thermal conductivity of polyamide 12 powder for use in laser sinteringRapid Prototyping Journal, 2013
- Mechanical properties of PA6/PA12 blend specimens prepared by selective laser sinteringPolymer Testing, 2012
- Effect of porosity on the thermal conductivity of copper processed by powder metallurgyJournal of Physics and Chemistry of Solids, 2012
- Optimum sintering region for laser sintered nylon-12Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2011
- Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection moldingComposites Science and Technology, 2011
- Quantifying the degree of particle melt in Selective Laser Sintering ®CIRP Annals, 2009
- Dependence of mechanical properties of polyamide components on build parameters in the SLS processJournal of Materials Processing Technology, 2007
- Effects of energy density on morphology and properties of selective laser sintered polycarbonateJournal of Materials Processing Technology, 1999