İbrahim Ersin Serhatlı
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
İbrahim Ersin Serhatlı has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Tuba Çakır Çanak
Department of Chemistry, Istanbul Technical University, Maslak, Istanbul, Turkey
5 shared publications- Tuba Çakır Çanak
Istanbul Technical University
5 shared publications Cansu Akarsu Dülgar
Organik Kimya San. Ve Tic. A.Ş., Eyüp, Turkey
4 shared publications- Aysen Onen
Department of Chemistry, Istanbul Technical University, Istanbul, Turkey
3 shared publications - Burçin Özbay Kısasöz
Department of Metallurgical and Materials Engineering Yildiz Technical University Istanbul Turkey
3 shared publications Ecem Temelkaya Bilgin
Organik Kimya San. Ve Tic. A.Ş., Eyüp, Turkey
3 shared publications
Latest Publications
- 29 May 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (15) , 14380-14390
Cure Kinetic Study of Epoxy Systems for Advanced Composites and Surface Film Applications
In this study, a comprehensive investigation is conducted to improve a surface film resin formulation for advanced composite applications. This surface film is designed to be co‐cured with a base substrate made of carbon fiber/epoxy‐based prepregs. The curing behavior of an epoxy resin formulation for a prepreg with a high glass transition temperature and a surface film formulation containing a high percentage of glass microspheres were characterized by isothermal and dynamic Differential Scanning Calorimetry, and rheometry; and the cure kinetics profiles were modeled. The effects of the curing system, glass microspheres, and accelerator on cure kinetics and rheological behavior were thoroughly investigated to assess the compatibility of these two resin systems to be used in a composite lay‐up. Initial trials resulted in excessive bleeding of the surface film resin, and specific improvements have been made to accelerate the reaction so that the system co‐cures without bleeding.
- 29 May 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (15) , 14380-14390
Cure Kinetic Study of Epoxy Systems for Advanced Composites and Surface Film Applications
In this study, a comprehensive investigation is conducted to improve a surface film resin formulation for advanced composite applications. This surface film is designed to be co‐cured with a base substrate made of carbon fiber/epoxy‐based prepregs. The curing behavior of an epoxy resin formulation for a prepreg with a high glass transition temperature and a surface film formulation containing a high percentage of glass microspheres were characterized by isothermal and dynamic Differential Scanning Calorimetry, and rheometry; and the cure kinetics profiles were modeled. The effects of the curing system, glass microspheres, and accelerator on cure kinetics and rheological behavior were thoroughly investigated to assess the compatibility of these two resin systems to be used in a composite lay‐up. Initial trials resulted in excessive bleeding of the surface film resin, and specific improvements have been made to accelerate the reaction so that the system co‐cures without bleeding.
- Open Access
- 22 April 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (17) , 17847-17858
Fabrication of Fluorine and Nitrogen-Based Flame Retardants Containing Rigid Polyurethane Foam with Improved Hydrophobicity and Flame Retardancy
In this work, a novel flame retardant containing fluorine and nitrogen was synthesized by using a copper-catalyzed azide-alkyne cycloaddition reaction, resulting in a hydroxyl-terminated compound with a triazole structure. This flame retardant was added to rigid polyurethane foam (RPUF) formulations in varying percentages (5, 10, and 15%) in order to chemically bond to isocyanates in the foam. Modified RPUF samples were analyzed for structural properties (FTIR), flammability (cone calorimetry, LOI, TGA), thermal conductivity, morphology (SEM), mechanical properties, and hydrophobicity. The results indicated significant improvements in flame retardancy with higher LOI values and lower peak heat release rates. The flame retardant chemically bonded to the foam, maintaining its mechanical integrity and thermal insulation and increasing hydrophobicity due to its fluorine content. This study highlights the potential of fluorine- and nitrogen-containing flame retardants for future fire-resistant materials.
- 22 April 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (17) , 17847-17858
Open AccessFabrication of Fluorine and Nitrogen-Based Flame Retardants Containing Rigid Polyurethane Foam with Improved Hydrophobicity and Flame Retardancy
In this work, a novel flame retardant containing fluorine and nitrogen was synthesized by using a copper-catalyzed azide-alkyne cycloaddition reaction, resulting in a hydroxyl-terminated compound with a triazole structure. This flame retardant was added to rigid polyurethane foam (RPUF) formulations in varying percentages (5, 10, and 15%) in order to chemically bond to isocyanates in the foam. Modified RPUF samples were analyzed for structural properties (FTIR), flammability (cone calorimetry, LOI, TGA), thermal conductivity, morphology (SEM), mechanical properties, and hydrophobicity. The results indicated significant improvements in flame retardancy with higher LOI values and lower peak heat release rates. The flame retardant chemically bonded to the foam, maintaining its mechanical integrity and thermal insulation and increasing hydrophobicity due to its fluorine content. This study highlights the potential of fluorine- and nitrogen-containing flame retardants for future fire-resistant materials.
- 3 January 2022
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 31 (5) , 4049-4059
Selective Laser Sintering Manufacturing and Characterization of Lightweight PA 12 Polymer Composites with Different Hollow Microsphere Additives
- 3 January 2022
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 31 (5) , 4049-4059
Selective Laser Sintering Manufacturing and Characterization of Lightweight PA 12 Polymer Composites with Different Hollow Microsphere Additives
- 23 August 2021
- Published by Taylor & Francis in Materials Technology
- Vol. 37 (10) , 1541-1553
Effects of copper fillers on mechanical and electrical properties of selective laser sintered PA 12-Cu composites
Selective Laser Sintering (SLS) is a widely used additive manufacturing (AM) technique for creating 3D geometries by adding materials in layers. Although neat polymer is mainly used in powder forms for production, organic or inorganic fillers can be added to produce polymer composites by SLS method. In this study, Polyamide 12 (PA 12) matrix composite parts filled with two different copper particles, dendritic and spherical shaped, were produced, and their mechanical, structural and electrical properties were investigated. The present study outlined that by increasing incident energy densities during sample fabrication, changes in mechanical and electrical characteristics were examined. The findings were analysed in terms of filler type and energy input, which were discovered to have a slight change in the bending behaviour of SLS components. Furthermore, the impact strength was shown to increase constantly with increasing energy density. Furthermore, whereas the electrical conductivity of spherical Cu-filled parts rose considerably, no significant change was seen in dendritic-shaped Cu-filled parts.
- 23 August 2021
- Published by Taylor & Francis in Materials Technology
- Vol. 37 (10) , 1541-1553
Effects of copper fillers on mechanical and electrical properties of selective laser sintered PA 12-Cu composites
Selective Laser Sintering (SLS) is a widely used additive manufacturing (AM) technique for creating 3D geometries by adding materials in layers. Although neat polymer is mainly used in powder forms for production, organic or inorganic fillers can be added to produce polymer composites by SLS method. In this study, Polyamide 12 (PA 12) matrix composite parts filled with two different copper particles, dendritic and spherical shaped, were produced, and their mechanical, structural and electrical properties were investigated. The present study outlined that by increasing incident energy densities during sample fabrication, changes in mechanical and electrical characteristics were examined. The findings were analysed in terms of filler type and energy input, which were discovered to have a slight change in the bending behaviour of SLS components. Furthermore, the impact strength was shown to increase constantly with increasing energy density. Furthermore, whereas the electrical conductivity of spherical Cu-filled parts rose considerably, no significant change was seen in dendritic-shaped Cu-filled parts.
- 15 May 2021
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 147 (6) , 4119-4129
Synthesis and characterization of phosphorus-based flame retardant containing rigid polyurethane foam
- 15 May 2021
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 147 (6) , 4119-4129
Synthesis and characterization of phosphorus-based flame retardant containing rigid polyurethane foam
- 4 January 2021
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (20)
Synthesis and characterization of boron‐acrylate/Santa Barbara Amorphous‐15 polymer composite
In the present work, boron‐acrylate/Santa Barbara Amorphous (SBA)‐15 polymer composite was synthesized using free radical polymerization method. Firstly, SBA‐15 was functionalized with 3‐(trimethoxysilyl)propyl methacrylate to obtain chemically bonded boron acrylate (BAc) polymer on the SBA‐15 surface. The structural analysis was evaluated via Fourier‐transform infrared spectroscopy and solid‐state nuclear magnetic resonance 13C. Samples were also characterized by using scanning electron microscopy, X‐ray powder diffraction, N2 adsorption/desorption and thermogravimetric analysis. In order to examine the BAc polymers in the mesopores, the silica framework was removed via hydrofluoric acid etching process. The results indicated that the synthesis of boron‐acrylate/SBA‐15 polymer composite was performed successfully. Thermal stabilities of the composites were higher with greater amounts of BAc polymer in mesopores under oxidative conditions.
- 4 January 2021
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (20)
Synthesis and characterization of boron‐acrylate/Santa Barbara Amorphous‐15 polymer composite
In the present work, boron‐acrylate/Santa Barbara Amorphous (SBA)‐15 polymer composite was synthesized using free radical polymerization method. Firstly, SBA‐15 was functionalized with 3‐(trimethoxysilyl)propyl methacrylate to obtain chemically bonded boron acrylate (BAc) polymer on the SBA‐15 surface. The structural analysis was evaluated via Fourier‐transform infrared spectroscopy and solid‐state nuclear magnetic resonance 13C. Samples were also characterized by using scanning electron microscopy, X‐ray powder diffraction, N2 adsorption/desorption and thermogravimetric analysis. In order to examine the BAc polymers in the mesopores, the silica framework was removed via hydrofluoric acid etching process. The results indicated that the synthesis of boron‐acrylate/SBA‐15 polymer composite was performed successfully. Thermal stabilities of the composites were higher with greater amounts of BAc polymer in mesopores under oxidative conditions.
- 23 September 2020
- Published by Taylor & Francis in Materials Technology
- Vol. 37 (4) , 213-223
Processing and Characterization of Hollow Glass-Filled Polyamide 12 Composites by Selective Laser Sintering Method
Selective Laser Sintering (SLS) is an accepted and improving technique for additive manufacturing in many different areas, from the applications of aerospace to automotive, consumer products to dental and medical materials. Lightweighting is a significant issue, especially in terms of the automotive and aerospace industries, mainly to increase fuel efficiency and reduce CO2 emission. The density reduction can be obtained by the addition of Hollow Glass Microspheres (HGMs) to Polyamide 12 (PA 12) polymer matrix. This study covers the different amounts of HGM filled PA 12 productions by SLS method and final structure characterization of PA 12-HGM composites. According to the performing thermal, physical, and mechanical tests, on increasing the amount of HGM in the structure, 10, 15, 20 weight percentages, respectively, the density of composites has been reduced significantly up to 20% for 20% of HGM filled PA 12 (PA 12–20HGM) composite, besides having a substantial rise in E-modulus.
- 23 September 2020
- Published by Taylor & Francis in Materials Technology
- Vol. 37 (4) , 213-223
Processing and Characterization of Hollow Glass-Filled Polyamide 12 Composites by Selective Laser Sintering Method
Selective Laser Sintering (SLS) is an accepted and improving technique for additive manufacturing in many different areas, from the applications of aerospace to automotive, consumer products to dental and medical materials. Lightweighting is a significant issue, especially in terms of the automotive and aerospace industries, mainly to increase fuel efficiency and reduce CO2 emission. The density reduction can be obtained by the addition of Hollow Glass Microspheres (HGMs) to Polyamide 12 (PA 12) polymer matrix. This study covers the different amounts of HGM filled PA 12 productions by SLS method and final structure characterization of PA 12-HGM composites. According to the performing thermal, physical, and mechanical tests, on increasing the amount of HGM in the structure, 10, 15, 20 weight percentages, respectively, the density of composites has been reduced significantly up to 20% for 20% of HGM filled PA 12 (PA 12–20HGM) composite, besides having a substantial rise in E-modulus.
- Open Access
- 11 June 2019
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF CHEMISTRY
- Vol. 43 (3) , 911-925
Synthesis of tetrakis bromine terminated phthalocyanine and its methylmethacrylate polymers via ATRP
- 11 June 2019
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF CHEMISTRY
- Vol. 43 (3) , 911-925
Open AccessSynthesis of tetrakis bromine terminated phthalocyanine and its methylmethacrylate polymers via ATRP