In Situ 3D-µ-Tomography on Particle-Reinforced Light Metal Matrix Composite Materials under Creep Conditions
Open Access
Abstract
In transportation light metal matrix composites (L-MMCs) are used increasingly due to their improved creep resistance even at higher application temperatures. Therefore, the creep behavior and failure mechanisms of creep loaded particle reinforced L-MMCs have been investigated intensively. Until now, creep damage analyses are usually performed ex situ by means of interrupted creep experiments. However, ex situ methods do not provide sufficient information about the evolution of creep damage. Hence, in situ synchrotron X-ray 3D-µ-tomography investigations were carried out enabling time and space resolved studies of the damage mechanisms in particle-reinforced titanium- and aluminum-based metal matrix composites (MMCs) during creep. The 3D-data were visualized and existing models were applied, specifying the phenomenology of the damage in the early and late creep stages. During the early stages of creep, the damage is determined by surface diffusion in the matrix or reinforcement fracture, both evolving proportionally to the macroscopic creep curve. In the late creep stages the damage mechanisms are quite different: In the Al-MMC, the identified mechanisms persist proportional to creep strain. In contrast, in the titanium-MMC, a changeover to the mechanism of dislocation creep evolving super-proportionally to creep strain occurs.Keywords
This publication has 41 references indexed in Scilit:
- Characterization of the creep properties of heat resistant 9–12% chromium steels by miniature specimen testingMaterials Science and Engineering: A, 2013
- Production of titanium matrix composites reinforced with SiC particlesComposites Science and Technology, 2008
- Metal matrix composites – From science to technological significanceComposites Science and Technology, 2005
- Simultaneous Tomography and Diffraction Analysis of Creep DamageScience, 2005
- An investigation of creep behavior in an SiC2124 Al compositeActa Materialia, 1997
- A simple procedure for estimating threshold stresses in the creep of metal matrix compositesScripta Materialia, 1997
- Steady state creep behaviour of particulate-reinforced titanium matrix compositesActa Materialia, 1996
- Creep behavior of TiC-particulate-reinforced Ti alloy compositeMaterials Letters, 1992
- High temperature creep of silicon carbide particulate reinforced aluminumActa Metallurgica et Materialia, 1990
- On creep fracture by void growthProgress in Materials Science, 1982