Full-Space Modeling of Geometric Variation Propagation in a Multi-Axis Milling System Considering Local Parallel Chains
Open Access
Abstract
The end-effector accuracy of a multi-axis milling system is primarily affected by assembly errors and deformation errors induced by low structural stiffness. This accuracy exhibits spatially nonlinear and non-uniform variations with changes in system pose, especially in robotic milling systems. Therefore, full-space accuracy modeling that accounts for manufacturing and assembly processes is crucial, particularly for machining workspace optimization. However, existing assembly deviation models are generally limited to error fluctuation simulations under fixed poses and lack the capability to analyze accuracy variations across the entire motion space of kinematic mechanisms, often requiring remodeling for different poses. To address this issue, this paper proposes a full-space geometric variation propagation modeling method for multi-axis robotic machining systems, considering local parallel chains. In the proposed model, the effects of manufacturing tolerances of multiple axes and their propagation on the geometric accuracy of a multi-axis milling system are considered in the spatial domain during the milling motion process. Firstly, three-dimensional tolerance expressions of joint and shaft-hole features are defined using small displacement Torsors, which can represent small feature variations within their tolerance ranges. Then, feature-to-feature Jacobian matrices are defined to characterize geometric variation propagation in multi-axis assemblies. Consequently, an overall Jacobian–Torsor-based expression model can be generated through the construction of a dimensional chain diagram. Based on the proposed model, case studies are conducted on a multi-axis robotic milling system to validate its effectiveness in modeling geometric variation propagation. The proposed method provides a comprehensive understanding of the mechanism of geometric variation propagation in robotic milling processes.Keywords
This publication has 36 references indexed in Scilit:
- An online prediction and compensation method for robot position errors embedded with error-motion correlationMeasurement, 2024
- Adaptive edge finishing process on distorted features through robot-assisted computer visionJournal of Manufacturing Systems, 2024
- A novel step-by-step procedure for the kinematic calibration of robots using a single draw-wire encoderThe International Journal of Advanced Manufacturing Technology, 2024
- Topology and dimension synchronous optimization design of 5-DoF parallel robots for in-situ machining of large-scale steel componentsMechanism and Machine Theory, 2022
- High-order joint-smooth trajectory planning method considering tool-orientation constraints and singularity avoidance for robot surface machiningJournal of Manufacturing Processes, 2022
- Positioning error compensation of an industrial robot using neural networks and experimental studyChinese Journal of Aeronautics, 2022
- High precision and efficiency robotic milling of complex parts: Challenges, approaches and trendsChinese Journal of Aeronautics, 2022
- Robots in machiningCIRP Annals, 2019
- Point-based solution using Jacobian-Torsor theory into partial parallel chains for revolving components assemblyJournal of Manufacturing Systems, 2018
- A solution of partial parallel connections for the unified Jacobian–Torsor modelMechanism and Machine Theory, 2015